List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. (IHE) FORMULATIONS

    SBC: Thermex Energy Corp            Topic: N/A

    APPROXIMATELY 15 YEARS AGO THE U.S. MILITARY EVALUATED COMMERCIAL SLURRY EXPLOSIVES. AT THAT TIME SLURRY EXPLOSIVES WAS IN ITS INFANCY. STANDARD OFF THE SHELF PRODUCTS WERE EVALUATED. FOR MANY REASONS (STORAGE PROBLEMS, CORROSIVITY, TEMPERATURE LIMITATIONS, PERFORMANCE, SENSITIVITY) SLURRIES WERE CATEGORICALLY LABELED UNSUITABLE. OFF THE SHELF COMMERCIAL SLURRIES WILL NEVER BE PARTICULARLY SUITED ...

    SBIR Phase I 1986 Department of DefenseAir Force
  2. -Virt: A Trusted Computing Base for Legacy Embedded Weapon Systems

    SBC: Intelligent Automation, Inc.            Topic: AF182077

    In this effort, we propose a novel microvisor architecture, called -Virt, to meet the needs for monitoring and protecting legacy embedded weapon systems. The -Virt microvisor is a trusted computing base that enables cyber resiliency and effective monitoring for legacy embedded weapon systems. The -Virt microvisor employs the microkernel architecture to provide monitoring and protection capabilitie ...

    SBIR Phase I 2019 Department of DefenseAir Force
  3. 3-D OBJECT RECOGNITION IN A NEURAL NETWORK THAT PERFORMS SENSOR FUSION

    SBC: ATLANTIC AEROSPACE ELECTRONICS CORP.            Topic: N/A

    THE FUSION OF SENSOR DATA TO PERFORM 3-D TARGET RECOGNITION FROM 2-D VIEWS IS AN INHERENTLY COMPLEX, COMPUTE-BOUND PROBLEM CHARACTERIZED BY AN OVERWHELMING AMOUNT OF PIXEL DATA WHICH MUST BE PROCESSED AND INTEGRATED INTO A SINGLE COHERENT DESCRIPTION OF OBJECTS IN AN IMAGE. NEURAL NETWORKS OFFER THE PROMISE OF PRACTICAL SOLUTIONS TO COMPUTER-BOUND PROBLEMS. ATLANTIC HAS BEEN PERFORMING LOW LEVEL F ...

    SBIR Phase I 1989 Department of DefenseAir Force
  4. 3-Inch Miniature Stabilized Gimbal Laser Pointing System

    SBC: Ascendant Engineering Solutions, LLC            Topic: AF141130

    ABSTRACT: Ascendant Engineering Solutions (AES) proposes to build upon the modeling and analysis and conceptual design effort from the execution of its Phase I and II MSGLPS contracts to develop a 3" flight-worthy form-fit-function Key Technology Demonstrator system during a Phase II contract. The primary objectives are to: 1) Precisely point and hold a laser spot on a target; 2) Safely control th ...

    SBIR Phase II 2016 Department of DefenseAir Force
  5. 3D Printing with Recycled Water Bottles for Air Force Applications

    SBC: RE3D INC.            Topic: AF191005

    With domain expertise in large-scale 3D printing, re:3D has developed a pellet extrusion 3D printer capable of printing with polyethylene terephthalate (PET) flake as well as non uniform pellets. This effort includes developing the ability to consistently dry and to easily clean & switch between materials and/or introduce additives for polymer reconstitution. A novel mechanism for feeding larger v ...

    SBIR Phase I 2019 Department of DefenseAir Force
  6. 60 Degree Kelvin Phase Change Material Device

    SBC: Swales & Assoc Inc.            Topic: N/A

    Stirling Cycle coolers induce some vibrations into the sensor systems that they are attached to. Because of this, there may be time periods for which the system performance can be enhanced, if the coolers are shut down. One method of allowing for system shut down is to provide an alternate passive cooling source for the sensors. SAI proposed to develop a closed system Phase Change Material Device ...

    SBIR Phase II 1995 Department of DefenseAir Force
  7. 60 Degree Kelvin Phase Change Material Device

    SBC: Swales & Assoc Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  8. 60 GHz COAXIAL COMPONENTS

    SBC: Weinschel Associates            Topic: N/A

    This is a feasibility study for a single pole, double throw, mechanical switch, using 1.85 mm coaxial connectors complying with the proposed connector standard in document IEC 46D (USA) 145. One major problem is the theoretical optimization of the two transitions from the 1.85 mm input coaxial airline to the switching reed which is a one mil thick, flat leaf spring and back to the 1.85 mm output c ...

    SBIR Phase I 1993 Department of DefenseAir Force
  9. 90nm Low-Power Radiation-Hardened Metal-Programmable System-on-a-Chip

    SBC: Silicon Space Technology Corporation            Topic: AF083189

    Silicon Space Technology (SST) working with Texas Instruments (TI) proposes to demonstrate a 90nm low-power radiation-hardened (RH) metal-programmable system-on-a-chip (SOC) cell library. This will be accomplished by defining, designing, simulating and laying out a demonstration circuit that could eventually be turned into a commercial product. A base slice will be developed upon which the demonst ...

    SBIR Phase II 2010 Department of DefenseAir Force
  10. A 3D imaging and Polarimetric Lidar Applicable to Mini/Micro UAV's

    SBC: SIGMA SPACE CORPORATION            Topic: AF04229

    We propose a wide swath, scanning, photon-counting lidar that automatically provides contiguous, co-registered, decimeter resolution 3D imaging and polarimetry data on a single overflight of the ground scene. Key components of the 3D imaging lidar include a microchip laser transmitter, 10x10 photon-counting segmented anode photomultiplier, a 100 channel multi-stop timer, and a unique dual wedge op ...

    SBIR Phase I 2004 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government