You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Streamlining Green Building Design- Developing the Sustainable Design Suite

    SBC: Green Building Studio, Inc.            Topic: N/A

    This project¿s intent is to enhance the Green Building Studio web service to incorporate various data and analyses that enable architects and other building designers to design sustainable buildings much more cost effectively. Today¿s building designers are struggling to design sustainable buildings and this solution is designed to make that task much easier. This enhanced service will be call ...

    SBIR Phase II 2006 Environmental Protection Agency
  2. Automated Removal of Brominated Flame Retardant Material From a Mixed E-Waste Plastics Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: N/A

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to there concerns e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differential dens ...

    SBIR Phase II 2009 Environmental Protection Agency
  3. Identification and Sorting of Printed Wiring Boards (PWB) Within an E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: N/A

    Electoronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differental dens ...

    SBIR Phase II 2006 Environmental Protection Agency
  4. Membrane Preconcentrator for Portable Trace VOC Detectors

    SBC: MEMBRANE TECHNOLOGY AND RESEARCH, INC.            Topic: N/A

    A volatile organic compound (VOC) detection system that is portable, sensitive to the low-ppb level, and able to provide reliable measurements in real time is needed for environmental compliance monitoring and process control in chemical plants. Recently, handheld and battery-powered ppb-level VOC photoionization detectors (PID) have become commercially available. However, the presence of water ...

    SBIR Phase II 2007 Environmental Protection Agency
  5. Quiet Reliable and Compact Fuel Cell Based APU (QRCFC-APU)

    SBC: Altex Technologies Corporation            Topic: N/A

    There are over 480,000 trucks on US roads, and each vehicle produces up to 20 tons CO2, 420 lbs or CO, 11 lbs of particulates and 250 lbs of nitrous oxides per year, when idling, and producing auxiliary power needed for the drivers comfort. A Quiet Reliable and Compact Fuel Cell Based APU (QRCFC-APU) is proposed to significantly reduce these emissions. The QRCFC overcomes challenges with current ...

    SBIR Phase II 2007 Environmental Protection Agency
  6. Automated Identification and Sorting of Rare Earth Elements in an E-waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: B

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differential densit ...

    SBIR Phase II 2014 Environmental Protection Agency
  7. Soy-Capped Polycarbonate Dendrimers for Tough, Sustainable Water-Based Wood Coatings

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: B

    The environmental impact of wood coatings has become a pressing issue as the manufacturing of wooden products such as flooring, cabinetry, furniture and doors moves back to the United States amidst rising labor costs overseas. For 30 years, the bulk of these products have been painted in countries with lax environmental regulations, allowing the use of inexpensive but environmentally hazardous oil ...

    SBIR Phase II 2014 Environmental Protection Agency
  8. Low-Cost Biological Solution for Reducing Carbon Pollution in Chemical Manufacturing

    SBC: INDUSTRIAL MICROBES, INC.            Topic: 14NCER1A

    Industrial Microbes is developing a green fermentation platform to replace carbon-emitting petrochemical production with newer methods that build chemicals out of methane and carbon dioxide.Chemical production is a major source of carbon pollution, responsible for 18% of direct industrialemissions. Our innovation is an engineered microbe that can consume carbon dioxide and methane and produce a ch ...

    SBIR Phase II 2016 Environmental Protection Agency
  9. High-Efficiency Nutrient Removal and Recovery for Achieving Low Regulatory Limits

    SBC: MICROVI BIOTECH, INC.            Topic: 15NCER05

    Discharging nutrients such as phosphorus and ammonia to surface waters can have far reaching health and environmental impacts, including the formation of toxic algae blooms, eutrophication, and loss of water_x000D_ quality. The wastewater industry has a significant need for high-efficiency nutrient removal technologies. However, current nutrient removal treatment technologies can be costly and in ...

    SBIR Phase II 2017 Environmental Protection Agency
  10. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency
US Flag An Official Website of the United States Government