You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase II 2003 Environmental Protection Agency
  2. SURFACTANT FLUSHING/WASHING--AN INNOVATIVE METHOD OF HAZARDOUS WASTE TREATMENT

    SBC: Eckenfelder Inc.            Topic: N/A

    THE TECHNICAL OBJECTIVES OF THIS PROPOSAL ARE ORIENTED TOWARD THE DEVELOPMENT OF SOIL SURFACTANT FLUSHING AND WASHING AS A LOW-COST, LOW-IMPACT, LOW-RISK, EFFECTIVE TECHNIQUE FOR THE REMOVAL AND ULTIMATE DESTRUCTION OF THE ORGANIC CONTAMINANTS IN SOIL. THESE OBJECTIVES ARE: DEMONSTRATION OF THE EFFECTIVENESS OF AN IONIC SURFACTANT SOLUTION AT CONCENTRATIONS ABOVE THE CRITICAL MICELLE CONCENTRATION ...

    SBIR Phase II 1990 Environmental Protection Agency
US Flag An Official Website of the United States Government