You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. N/A

    SBC: SURFACE TREATMENT TECHNOLOGIES, INC.            Topic: N/A

    N/A

    SBIR Phase II 1999 Environmental Protection Agency
  2. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase II 2003 Environmental Protection Agency
  3. N/A

    SBC: ENVIRONMENTAL ELEMENTS CORP.            Topic: N/A

    N/A

    SBIR Phase II 1999 Environmental Protection Agency
  4. SURFACTANT FLUSHING/WASHING--AN INNOVATIVE METHOD OF HAZARDOUS WASTE TREATMENT

    SBC: Eckenfelder Inc.            Topic: N/A

    THE TECHNICAL OBJECTIVES OF THIS PROPOSAL ARE ORIENTED TOWARD THE DEVELOPMENT OF SOIL SURFACTANT FLUSHING AND WASHING AS A LOW-COST, LOW-IMPACT, LOW-RISK, EFFECTIVE TECHNIQUE FOR THE REMOVAL AND ULTIMATE DESTRUCTION OF THE ORGANIC CONTAMINANTS IN SOIL. THESE OBJECTIVES ARE: DEMONSTRATION OF THE EFFECTIVENESS OF AN IONIC SURFACTANT SOLUTION AT CONCENTRATIONS ABOVE THE CRITICAL MICELLE CONCENTRATION ...

    SBIR Phase II 1990 Environmental Protection Agency
  5. Development of a DYNAJET Cavitation System for High-Rate Disinfection of Combined Sewer Overflow

    SBC: DYNAFLOW, INC.            Topic: N/A

    Dynaflow, Inc., proposes the development of a novel hydrodynamic cavitation process for high-rate disinfection of combined sewer overflows (CSOs) that would be economical and readily applicable to both large- and small-scale systems. This process would not produce potentially hazardous by-products (as does chlorination), and would operate in the presence of suspended solids. Ultrasonically induc ...

    SBIR Phase I 2003 Environmental Protection Agency
  6. Microwave-Regenerated Ceramic Diesel Particulate Filter Using a Catalyst-Coated Silicon Carbide Fiber Filter Substrate

    SBC: Industrial Ceramic Solutions, LLC            Topic: N/A

    The proposed research will demonstrate a diesel particulate matter (PM) exhaust aftertreatment technology that exceeds the performance of the catalyzed diesel particle filter (CDPF) technologies currently being tested by the U.S. Environmental Protection Agency (EPA). Using a unique microwave-sensitive silicon carbide fiber filter cartridge, Industrial Ceramic Solutions¿ microwave-regenerated pa ...

    SBIR Phase I 2003 Environmental Protection Agency
  7. Advanced Concrete Materials for Water and Wastewater Pipeline Repair and Construction

    SBC: CeraTech, Inc.            Topic: N/A

    CeraTech, Inc., proposes the development of novel (patent pending) phosphate-based concrete for fresh water and wastewater pipeline. The materials being investigated utilize a very high percentage of residual materials (coal ash, municipal solid waste ash, bio-solids ash, etc., up to 80 wt%). The concrete exhibits zero shrinkage as well as extremely high bondability to both concrete and reinforc ...

    SBIR Phase I 2003 Environmental Protection Agency
  8. Precision Cleaning/Sub-Micron Level Cleaning with Liquid/Supercritical Carbon Dioxide (CO2) Technology

    SBC: GT Equipment Technologies, Inc.            Topic: N/A

    Not Available Q-Peak, Inc. proposes to develop a broadly tunable, 10-W-average-power IR source suitable for use as a DIAL system transmitter and based on the combination of a Nd-doped pulsed pump laser and optical parametric oscillators (OPO). The laser source, a compact, diode-pumped, 5-10 kHz pulse-repetition-rate, Q-switched Nd:YLF laser, will pump a tandem OPO system consisting of an angle-tu ...

    SBIR Phase I 1999 Environmental Protection Agency
  9. The Reduction of Mercury and Sulfur Dioxide Emission from Coal-Fired Power Plants

    SBC: LYNNTECH INC.            Topic: N/A

    Not Available This project is intended to develop a number of technologies and specific solutions to the problem of providing enhanced aircrew comfort particularly during extended missions and in ejection seats. This program will specifically address the issue of physical comfort associated with crew seating as opposed to the general cockpit environment. Efforts will be concentrated on the seat c ...

    SBIR Phase I 1999 Environmental Protection Agency
  10. An Economical Alternative for Sorting Polymers on the Small materials Recovery Facility (MRF) Level

    SBC: National Recovery Technologies LLC            Topic: N/A

    Not Available Propellant technologies are of the most crucial to revolutionize aerospace propulsion in the next century. New propellants strive to make spacecraft safer, more operable and higher performing. Propellant technologies have the power to make space flight more affordable and deliver higher performance. Propellants for in space maneuvering need to be ignited to release its chemical ener ...

    SBIR Phase I 1999 Environmental Protection Agency
US Flag An Official Website of the United States Government