You are here
The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.
SBC: CREARE LLC Topic: N/A
Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...SBIR Phase II 2003 Environmental Protection Agency
SBC: DYNAFLOW, INC Topic: N/A
Dynaflow, Inc., proposes the development of a novel hydrodynamic cavitation process for high-rate disinfection of combined sewer overflows (CSOs) that would be economical and readily applicable to both large- and small-scale systems. This process would not produce potentially hazardous by-products (as does chlorination), and would operate in the presence of suspended solids. Ultrasonically induc ...SBIR Phase I 2003 Environmental Protection Agency
SBC: CeraTech, Inc. Topic: N/A
CeraTech, Inc., proposes the development of novel (patent pending) phosphate-based concrete for fresh water and wastewater pipeline. The materials being investigated utilize a very high percentage of residual materials (coal ash, municipal solid waste ash, bio-solids ash, etc., up to 80 wt%). The concrete exhibits zero shrinkage as well as extremely high bondability to both concrete and reinforc ...SBIR Phase I 2003 Environmental Protection Agency