You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
ATES: Advanced Technology Exposure Suit
SBC: Mide Technology Corporation Topic: N/AN/A
SBIR Phase II 2000 Department of DefenseSpecial Operations Command -
Size-Selection Aerosol Characterization Instrument
SBC: AERODYNE RESEARCH INC Topic: GWe propose to develop anew monitor that provides composition information of particles in the ultrafine (10-100 nm) fine (100 nm– 2.5 µm) and coarse (2.5 – 10 µm) size modes in near real time. Particle monitoring technologies are important for better characterization of the environmental, health and visibility effects of both anthropogenic and biogenic aerosol particles. Current monitoring t ...
SBIR Phase II 2013 Environmental Protection Agency -
N/A
SBC: E PAINT COMPANY Topic: N/AN/A
SBIR Phase II 2000 Environmental Protection Agency -
N/A
SBC: KSE, INC. Topic: N/AN/A
SBIR Phase II 2000 Environmental Protection Agency -
N/A
SBC: LYNNTECH INC. Topic: N/AN/A
SBIR Phase II 2000 Environmental Protection Agency -
N/A
SBC: PHYSICAL SCIENCES INC. Topic: N/AN/A
SBIR Phase II 2000 Environmental Protection Agency -
N/A
SBC: AERODYNE RESEARCH INC Topic: N/AN/A
SBIR Phase II 2000 Environmental Protection Agency -
N/A
SBC: PHYSICAL SCIENCES INC. Topic: N/AN/A
SBIR Phase II 2000 Environmental Protection Agency -
Environmentally-Benign Polytetrafluoroethylene (PTEE) Coating for Mold Release
SBC: GVD CORP Topic: CGVD proposed to develop high performance, VOC-free and PFOA-free, non-stick mold release coating based on its novel PTFE (Polytetraflouroethylene) fluoropolymer technology. Most commercial mold release agents make use of organic solvents and vaporize during drying, creating a significant air quality impact. Even water-based formulations often require the use of fluorinated surfactant additives to ...
SBIR Phase II 2013 Environmental Protection Agency -
Protective Superhydrophobic Coatings for Underwater Electronics
SBC: LYNNTECH INC. Topic: SOCOM13001Sensitive and expensive electronic equipment used in marine environments are generally subjected to harsh extremes. Component lifetimes are typically extended by physical isolation using bags, hard containers or with conformal impermeable coatings. However, over time, protective measures become compromised, the resulting exposure causing corrosion and short circuit-driven malfunctions. There is ...
SBIR Phase I 2013 Department of DefenseSpecial Operations Command