List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. N/A

    SBC: Lynntech Inc.            Topic: N/A

    N/A

    SBIR Phase II 2000 Environmental Protection Agency
  2. Subsurface Treatment for Arsenic Removal

    SBC: Daniel B. Stephens & Associates, Inc.            Topic: N/A

    Subsurface treatment for arsenic removal (STAR) is an innovative technology for treatment of arsenic in groundwater at the wellhead. The STAR technology can result in large cost savings when compared with conventional above-ground treatment methods. The goal is to create a subsurface biogeochemical barrier composed of reactive iron hydroxide minerals and iron bacteria within the aquifer surround ...

    SBIR Phase I 2003 Environmental Protection Agency
  3. Development of a DYNAJET Cavitation System for High-Rate Disinfection of Combined Sewer Overflow

    SBC: DYNAFLOW, INC            Topic: N/A

    Dynaflow, Inc., proposes the development of a novel hydrodynamic cavitation process for high-rate disinfection of combined sewer overflows (CSOs) that would be economical and readily applicable to both large- and small-scale systems. This process would not produce potentially hazardous by-products (as does chlorination), and would operate in the presence of suspended solids. Ultrasonically induc ...

    SBIR Phase I 2003 Environmental Protection Agency
  4. Advanced Concrete Materials for Water and Wastewater Pipeline Repair and Construction

    SBC: CeraTech, Inc.            Topic: N/A

    CeraTech, Inc., proposes the development of novel (patent pending) phosphate-based concrete for fresh water and wastewater pipeline. The materials being investigated utilize a very high percentage of residual materials (coal ash, municipal solid waste ash, bio-solids ash, etc., up to 80 wt%). The concrete exhibits zero shrinkage as well as extremely high bondability to both concrete and reinforc ...

    SBIR Phase I 2003 Environmental Protection Agency
  5. N/A

    SBC: ENVIRONMENTAL TECHNOLOGY & EDUCATION CTR            Topic: N/A

    Not Available Solution quality assessment and diagnosis which reflect the depth of understanding possessed by computational fluid dynamics (CFD) experts is required to make efficient use of modern CFD methods. The goal of this work is to develop an automated system whi

    SBIR Phase I 2000 Environmental Protection Agency
  6. Efficient Regenerating Oxidizer for Destruction of Volatile Organic Compounds

    SBC: ENVIRONMENTAL TECHNOLOGY & EDUCATION CTR            Topic: N/A

    To help improve air quality, the U.S. Environmental Protection Agency is seeking innovative and cost-effective new technologies to remove volatile organic compounds (VOCs) from the emissions of stationary sources. The current technologies, carbon adsorbers and catalytic thermal oxidizers, are heavy, expensive, insufficiently regenerating, and sometimes not sufficiently effective to meet regulator ...

    SBIR Phase I 2003 Environmental Protection Agency
  7. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available The purpose of the proposed research is to show that significant improvements in the performance of electrically tunable microwave devices can be obtained using a novel type of superlattice structures. The approach is based on recent work at Neocera showi

    SBIR Phase I 2000 Environmental Protection Agency
  8. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available NASA SBIR Solicitation 98-1 emphasizes that ¿Advanced extravehicular activity (EVA) systems are necessary for the successful support of future human space missions.¿ Topic 09.05 recognizes that development of advanced EVA systems depends on ¿methods for..

    SBIR Phase I 2000 Environmental Protection Agency
  9. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available Mod Works proposes to construct major airframe components using modern aluminum manufacturing process (MAM). The objective will be to reduce the cost of manufacturing while maintaining better surface quality. Major reduction in cost and labor requirement

    SBIR Phase I 2000 Environmental Protection Agency
  10. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available There is rapid growth in the amount of remotely sensed (RS) image data. All future NASA and commercial remote sensing projects will have to deal with databases of unprecedent size and complexity. Providing an effective information link between these vast

    SBIR Phase I 2000 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government