List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. N/A

    SBC: Lynntech Inc.            Topic: N/A

    N/A

    SBIR Phase II 2000 Environmental Protection Agency
  2. Novel Method for Ferrate Production

    SBC: Lynntech Inc.            Topic: N/A

    New environmental regulations have identified many of the currently used oxidizing agents employed for industrial waste control, disinfection, and wastewater treatment as a caveat that must be addressed. Ferrate has potential for becoming the alternative of choice because of its aggressive oxidation properties and its negligible impact on the environment. However, there has been little industrial ...

    SBIR Phase II 2002 Environmental Protection Agency
  3. Development of a Multianalyte Biosensor Instrument

    SBC: Ergopedia, Inc.            Topic: N/A

    This Phase I project will develop a multianalyte biosensor field screening instrument (MBFI). The MBFI has the potential to reduce the annual cost of environmental analyses in the United States by more than $20 million and to reduce the analysis turnaround time from approximately 19 days to less than 15 minutes. The major barrier to the development of a biosensor instrument for environmental mea ...

    SBIR Phase II 1998 Environmental Protection Agency
  4. FEASIBILITY OF AN INTEGRATED CONTINUOUS PROCESS USING AUTO- MATIC INSTRUMENTATION AND STATAISTICAL ANALYSES TO REDUCE COSTS AND TO INCREASE THE EFFICIENCY OF PEAK DETECTION AND POLLUTION CONTROL IN UNDERGROUND STORAGE TANKS

    SBC: Production Monitoring &            Topic: N/A

    OVER THE LAST SEVERAL YEARS, THE EPA HAS DEVOTED MAJOR EF- FORTS TO IDENTIFY AND DOCUMENT THE MAGNITUDE OF THE RISKS OFENVIRONMENTAL POLLUTION DUE TO LEAKING UDERGROUND STORAGE TANKS (UST). IN APRIL 1987, THE EPA PUBLISHED THE PROPOSED REGULATIONS FOR THE OWNERS AND OPERATORS OF UST, WHICH ARE EXPECTED TO BE FINALIZEDD IN EARLY 1988. THESE REGULATIONS INCLUDE REQUIREMENTS FOR TANK TIGHTNESS TESTS, ...

    SBIR Phase II 1989 Environmental Protection Agency
  5. Development of a Cavitating Jet System for Removal of Pesticides and Other Pollutants From Wastewater Discharge

    SBC: DYNAFLOW, INC            Topic: N/A

    Dynaflow, Inc., proposes the development of a novel jet-induced cavitation process for the removal of various pollutants¿including pesticides from wastewater discharge¿ that would be economical, readily applicable to both large- and small-scale systems, and that does not produce potentially hazardous by-products of chlorination and ozonation. Ultrasonically induced cavitation is known to be capa ...

    SBIR Phase I 2002 Environmental Protection Agency
  6. A Portable Flow Cytometer Suitable for the Rapid Detection of Adenovirus in Wastewater

    SBC: Geomet Technologies, Inc.            Topic: N/A

    The goal of this project is to develop a portable system for the real-time detection and quantification of adenovirus in wastewater. The system is based on a small, portable flow cytometer that was developed and is being marketed by Becton Dickinson Biosciences (BDB) under the trade name FACSCount¿ for use in selected medical and research applications. Unlike previous efforts to apply flow cytome ...

    SBIR Phase I 2002 Environmental Protection Agency
  7. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available The purpose of the proposed research is to show that significant improvements in the performance of electrically tunable microwave devices can be obtained using a novel type of superlattice structures. The approach is based on recent work at Neocera showi

    SBIR Phase I 2000 Environmental Protection Agency
  8. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available NASA SBIR Solicitation 98-1 emphasizes that ¿Advanced extravehicular activity (EVA) systems are necessary for the successful support of future human space missions.¿ Topic 09.05 recognizes that development of advanced EVA systems depends on ¿methods for..

    SBIR Phase I 2000 Environmental Protection Agency
  9. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available Mod Works proposes to construct major airframe components using modern aluminum manufacturing process (MAM). The objective will be to reduce the cost of manufacturing while maintaining better surface quality. Major reduction in cost and labor requirement

    SBIR Phase I 2000 Environmental Protection Agency
  10. N/A

    SBC: Lynntech Inc.            Topic: N/A

    Not Available There is rapid growth in the amount of remotely sensed (RS) image data. All future NASA and commercial remote sensing projects will have to deal with databases of unprecedent size and complexity. Providing an effective information link between these vast

    SBIR Phase I 2000 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government