You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Monitor for Risk of Structural Collapse

    SBC: Sekos, Inc.            Topic: N/A

    The proposal is to develop a system to monitor fire-induced structural vibrations that provide real time data correlating with structural integrity. The system is designed to bridge an "information void" and provide firefighters with information that can warn of impending collapse. The system, based on accelerometer technology, will monitor structural integrity through the algorithmic analysis of ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  2. Dual-Probe CD-AFM Calibration

    SBC: XIDEX CORPORATION            Topic: N/A

    Xidex proposes to demonstrate the feasibility of calibrating a critical-dimension atomic force microscope (CD-AFM) without the use of a reference artifact in such a way that high-precision critical dimensions can be generated independently of changes in probe tip shape. We plan to demonstrate sub-nanometer repeatability for tip-to-tip calibration, and demonstrate single-point critical-dimension me ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  3. Development of a Laboratory Scale CD-SAXS Device for Semiconductor Metrology Applications

    SBC: Jordan Valley Semiconductors, Inc.            Topic: N/A

    A semiconductor metrology tool will be developed employing the technique of small-angle x-ray scattering (SAXS) to measure the critical dimension (CD) of patterned device structures. The feasibility of the SAXS technique to measure CD has been shown using high-power synchrotron radiation facilities which are not of practical use to the semiconductor industry. The ultimate project goal is to produc ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  4. Novel Technical Approach to Produce III-N Sample Libraries

    SBC: TECHNOLOGIES & DEVICES INTERNATIONAL,            Topic: N/A

    TDI proposes to produce combinatorial GaN and AlGaN samples library having a wide range of doping and fabricated using a variety of surface treatment conditions. These samples will be grown using novel technological approach based on advanced hydride vapor phase epitaxy (HVPE). This method is known to produce bulk GaN materials with low defect density. Recently, TDI has demonstrated high throughpu ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  5. Monitoring Groundwater Contaminants

    SBC: LYNNTECH INC.            Topic: N/A

    Chlorinated hydrocarbons represent the most prevalent contaminants in the subsurface, threatening the quality of groundwater at aquifers. Existing technologies for monitoring these contaminants require expensive, labor-intensive methods of sample collection and analysis. The goal of this Phase I research project is to develop a low-cost, compact, reliable, automated, unattended, and long-term mo ...

    SBIR Phase I 2004 Environmental Protection Agency
  6. A Micro-Variable Circular Orifice (MVOC) Fuel Injector with Variable Spray Angles and Patterns for Reducting NOx Emissions from Diesel Engines

    SBC: Quantlogic Corporation            Topic: N/A

    Diesel engines are widely used due to their high fuel efficiency. However, conventional diesel engines have high NOx and soot emissions. Selective catalytic reduction (SCR) for NOx reduction is less accepted by the construction industry due to complexity and cost. In-cylinder NOx reduction is more desirable. When low temperature combustion and/or premixed charge compression ignition (PCCI) combus ...

    SBIR Phase I 2008 Environmental Protection Agency
  7. Monitoring Groundwater Contaminants

    SBC: LYNNTECH INC.            Topic: C3NCERD1

    Chlorinated hydrocarbons represent the most prevalent contaminants in the subsurface, threatening the quality of groundwater at aquifers. Existing technologies for monitoring these contaminants require expensive, labor-intensive methods of sample collection and analysis. The goal of this Phase I research project is to develop a low-cost, compact, reliable, automated, unattended, and lo ...

    SBIR Phase I 2004 Environmental Protection Agency
  8. Sensitive, Quantitative, and Portable Anatoxin Assay using Aptamers and Quantum Dot Nanoshell Reporting

    SBC: Biotex, Inc.            Topic: N/A

    This proposed project directly addresses an U.S. Environmental Protection Agency (EPA) calling for improved detection and measurement techniques including screening kits for algal neurotoxins (especially cyanobacterial anatoxin) and cytotoxins in drinking water systems. Bloom-forming cyanobacteria have been observed in water bodies, including drinking water reservoirs all over the world. Several ...

    SBIR Phase I 2008 Environmental Protection Agency
  9. Sensitive, Quantitative, and Portable Anatoxin Assay using Aptamers and Quantum Dot Nanoshell Reporting

    SBC: Biotex, Inc.            Topic: 07NCERD1

    This proposed project directly addresses an U.S. Environmental Protection Agency (EPA) calling for “improved detection and measurement techniques including screening kits for algal neurotoxins (especially cyanobacterial anatoxin) and cytotoxins in drinking water systems.” Bloom-forming cyanobacteria have been observed in water bodies, including drinking water reservoirs all over the world. Se ...

    SBIR Phase I 2008 Environmental Protection Agency
  10. Fluorescent Nanoparticle-Aptmer-Magnetic Bead Sensor for Bioterrorism Detection in Water

    SBC: Operational Techologies Corporation            Topic: N/A

    Some bioterrorism agents cause disease at very low infective doses and their presence can be masked by the environment. Therefore, ultrasensitive detection is required for homeland defense applications. In this Phase I research project, Operational Technologies Corporation (OpTech) proposes to couple DNA aptamers made by the Systematic Evolution of Ligands by Exponential Enrichment (SELEX) proce ...

    SBIR Phase I 2004 Environmental Protection Agency
US Flag An Official Website of the United States Government