List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Microelectrochemical Capillary System for Environmental Analytical Lab on a Chip

    SBC: Lynntech Inc.            Topic: C

    As part of its mission to protect human health and the environment, the U.S. Environmental Protection Agency develops and promotes innovative cleanup strategies that restore contaminated sites to productive use, reduce associated costs, and promotes environmental stewardship. Testing and characterization of the environment for potentially harmful contaminants is a costly endeavor. Current technolo ...

    SBIR Phase II 2012 Environmental Protection Agency
  2. Industrial Process Pollution Reduction by Development of Amorphous Biogenic Silica to Replace Fumed Silica

    SBC: SioTeX Corporation            Topic: 14NCER1A

    Fumed silica is an important additive in many products including paints, plastics and tires, but it is produced by an energy-intensive costly, toxic and hazardous process. SioTex has developed a superior triple green replacement for fumed silica that produces no toxic waste, uses little energy, and is inexpensive.  Our patent pending technology uses rice hulls, a bio-waste, as the feedstock.  Us ...

    SBIR Phase II 2016 Environmental Protection Agency
  3. N/A

    SBC: Lynntech Inc.            Topic: N/A

    N/A

    SBIR Phase II 2000 Environmental Protection Agency
  4. MEMS Biosensor for In Situ Drinking Water Analysis

    SBC: AGAVE BIOSYSTEMS INC.            Topic: N/A

    The occurrence of causative agents such as Cryptosporidium parvum and other pathogens in water supplies presents a critical issue. Transmitted through water and animals, these organisms provide a reservoir of infection, which results in the excretion of the environmentally stable cysts or oocysts that are impervious to inactivation by many drinking water disinfectants. Cryptosporidium infections a ...

    SBIR Phase II 2001 Environmental Protection Agency
  5. A New Microfludic System for the Determination of Cryptosporidium Oocysts in Water

    SBC: Lynntech Inc.            Topic: N/A

    Cryptosporidium, originating from contamination of public drinking water supplies, ponds, rivers, or swimming pools, have cause large-scale and deadly outbreaks, which became a major cause of waterborne infectious diseases. Since 1991, the percent of outbreaks attributable to Cryptosporidium has doubled, and in the 1993-1994 period, 17 percent of all outbreaks were caused by Cryptosporidium. In 19 ...

    SBIR Phase II 2001 Environmental Protection Agency
  6. A Novel Method for Converting a Negative Value Waste Into a Commodity Chemical

    SBC: Lynntech Inc.            Topic: N/A

    It is estimated that there are approximately 300 million tires discarded each year in the United States and this is in addition to the 800 million scrap tires that reside in landfills and tire dumps throughout the country. About 180 million are recycled, and the remaining 120 million scrap tires are discarded (legally or illegally) in landfills or tire dumps. Current tire reuse technologies offer ...

    SBIR Phase II 2001 Environmental Protection Agency
  7. Novel Method for Ferrate Production

    SBC: Lynntech Inc.            Topic: N/A

    New environmental regulations have identified many of the currently used oxidizing agents employed for industrial waste control, disinfection, and wastewater treatment as a caveat that must be addressed. Ferrate has potential for becoming the alternative of choice because of its aggressive oxidation properties and its negligible impact on the environment. However, there has been little industrial ...

    SBIR Phase II 2002 Environmental Protection Agency
  8. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase II 2003 Environmental Protection Agency
  9. GENERALIZED MODELING OF CONDENSATION FOR REACTOR APPLICATION

    SBC: CREARE LLC            Topic: N/A

    A CONSTITUTIVE PACKAGE WILL BE DEVELOPED FOR THE MODELING OFDIRECT CONTACT CONDENSATION IN ADVANCED COMPUTER CODES FOR NUCLEAR REACTOR ANALYSIS. SINCE CURENT APPROACHES ARE BUILT UPON FLOW REGIME MAPS WHICH DO NOT ACCOUNT FOR CON DENSATION EFFECTS, PRESENT ADVANCED THERMAL/HYDRAULIC CODES ARE UNABLE TO MODEL COLD LEG FLOW BEHAVIOR CONSISTENTLY DURING CONDENSATION, ESPECIALLY IF THE FLOW IS OSCILLA ...

    SBIR Phase II 1986 Nuclear Regulatory Commission
  10. IMPROVED METHOD FOR HEATING CATALYTIC CONVERTERS OF VEHICLES TO ATTAIN ULTRA-LOW EMISSIONS

    SBC: Lynntech Inc.            Topic: N/A

    THE THREE-WAY CATALYTIC CONVERTER IS THE MOST IMPORTANT DEVICE MAKING TODAY'S AUTOMOBILES COMPLY WITH EXISTING EMISSION LAWS. THE FIRST TWO OR THREE MILES IN A TYPICAL 22-MINUTE, 12-MILE COMUTE IN TODAY'S VEHICLES RESULT IN THE EMISSION OF HALF OF THE TOTAL NON-METHANE HYDROCARBONS, WHICH RESULT IN THE PRODUCTION OF URBAN SMOG, AS WELL AS HALF OF THE TOXIC CO EMISSIONS. THIS OCCURS BECAUSE THE CAT ...

    SBIR Phase II 1994 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government