You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
A MEMBRANE-BASED PROCESS FOR THE REMOVAL OF BTEX FROM GLYCOL DEHYDRATION VENTS
SBC: BEND RESEARCH, INC. Topic: N/AA major source of volatile organic compound emissions into the environment is thevent stream from the glycol-based dehydration units used to remove water fromnatural gas. A glycol dehydration unit operating on a 50-million SCFD naturalgas stream will typically discharge more than 40 tons per year of varioushazardous volatile organic air pollutants - about half of which is "BTEX"(benzene, toluene, ...
SBIR Phase II 1996 Environmental Protection Agency -
Development of a Membrane-based System for the Recovery and Reuse of Solvents
SBC: BEND RESEARCH, INC. Topic: N/AN/A
SBIR Phase I 1996 Environmental Protection Agency -
High efficiency Biofilter for Styrene Removal from Indoor Air
SBC: Bioengineering Resources, Inc. Topic: N/AN/A
SBIR Phase I 1996 Environmental Protection Agency -
Treatment of Produced Water from Coal-Bed Methane Production Using Carbon Aerogel Technology
SBC: Bpf, Inc. Topic: N/AN/A
SBIR Phase I 1996 Environmental Protection Agency -
Plasma Process for Pretreatement of Metal Surface
SBC: BRIGHTON TECHNOLOGIES GROUP, INC Topic: N/AN/A
SBIR Phase I 1996 Environmental Protection Agency -
Low Cost, Environmentally Benign Non-Chromate Conversion Coating
SBC: Chemat Technology, Inc. Topic: N/AN/A
SBIR Phase I 1996 Environmental Protection Agency -
Sol-Gel Derived Composite Coating as a Surface Pretreatment of Aluminium Alloy Adhesive Bonding
SBC: Chemat Technology, Inc. Topic: N/AN/A
SBIR Phase I 1996 Environmental Protection Agency -
PROCESSING SPENT CATALYST TO RECOVER METAL VALUES AND TO MINIMIZE OR ELIMINATE HAZARDOUS WASTE
SBC: Chemical & Metal Industries, I Topic: N/AReplacements for the halocarbons banned by the Montreal Protocol will be producedby technologies which generate spent catalysts as a waste byproduct. These spentcatalysts contain tin, a valuable metal resource, in a matrix that willundoubtedly be classified as hazardous with regard to its disposal.Chemical & Metal Industries, Inc., proposed in this Phase I effort to investigatetwo alternative tec ...
SBIR Phase II 1996 Environmental Protection Agency -
Innovatie process technology to recover metals values from hazardous waste
SBC: Chemical & Metal Industries, I Topic: N/AN/A
SBIR Phase I 1996 Environmental Protection Agency -
ON BOARD OXYGEN GENERATING MEMBRANES FOR REDUCED START-UP EMISSIONS
SBC: COMPACT MEMBRANE SYSTEMS, INC. Topic: N/AAutomobile three-way catalyst (TWC) are quite efficient at steady state operatingtemperature typically destroying 98% of incoming hydrocarbons (HCs) and carbonmonoxide (CO). However, up to 80% of emissions occur during the first fewminutes of Federal Test Procedure when the engine is running rich, the engine iscold and TWC has not reached light-off temperature. To significantly reduce HCsand CO ...
SBIR Phase II 1996 Environmental Protection Agency