List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  2. High Capability Portable Foreign Object Debris (FOD) Removal System for Naval Aircraft

    SBC: ROBOTIC TECHNOLOGIES OF TENNESSEE            Topic: N162104

    The United States Marine Corps (USMC) spends tens of millions annually on foreign object debris (FOD) damages related to the AV-8B Program and the DOD up to $100 million in total on FOD related problems. RTT proposes to create mechanized, semi-automated and autonomous solutions to clear and maintain FOD free workspace areas in the three targeted FOD problem areas. This Phase 2 effort focuses on cr ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Actuators for Direct Fire Precision Munitions

    SBC: DYNAMIC STRUCTURES AND MATERIALS, LLC            Topic: A18028

    Americas potential adversaries and non-state actors have increasing access to sophisticated weapons. Our warfighters need counters to these threats that turn the cost ratio in our favor.Affordable guided projectiles launched at high velocities from conventional powder guns can accomplish the direct fire missions that were previously reserved for expensive missile systems.However, several design ch ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Compact Modular DACS

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: MDA18008

    GTL has identified an innovative architecture for KV Divert and Attitude Control System (DACS). Instead of mounting a set of liquid propellant tanks around a central structural mast as done in conventional storable liquid DACS, the Compact Modular DACS uses an innovative configuration for propellant storage.The CMDACS architecture has increased volumetric efficiency that will increase the kinemati ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  5. Analysis, Identification, and Eradication of Mold Development in the Substance (Rations) Supply Chain

    SBC: ASSURED BIO LABS, LLC            Topic: DLA173001

    DLA Subsistence Supply Chain (SSC) experiences mold growth on wood pallets used for transportation of MRE. We propose a mold growth analysis and mitigation methodology based on supply chain, microbial monitoring and statistical techniques. The supply chain is modeled as a network of storage, production nodes and transportation links. A data collection procedure is developed to gather data related ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  6. ACE Multi-Role Vehicle

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: SB173006

    Over the past decade, GTL has developed a suite of transformational technologies that provide superior performance for reduced cost.Each of these technologies have been matured to TRL 6 and establish the technical foundation for the Advanced Cryogenic Expendable (ACE) Multi-Role Vehicle (ACE-MRV). The ACE-MRV is a high-performance expendable rocket stage that can either be launched (from the groun ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  7. Alternative Mixing Technologies for High-Energy, Solid Materials for Large Gas Generator Propellant

    SBC: E&G Associates, Inc.            Topic: N172141

    Traditional manufacturing methods for producing warheads, propellants, and pyrotechnic systems are timely and costly. Current production methods include cast-cure, melt-cast, powder molding, and machining. A rigorous design study that matches the appropriate hardware and engineering solutions to the propellant manufacturing process is proposed to increase the likelihood of a successful modernizati ...

    SBIR Phase I 2018 Department of DefenseNavy
  8. Advanced High-g Accelerometers in Small Form Factor for Inertial Measurement Unit Applications

    SBC: International FemtoScience, Inc.            Topic: MDA17007

    International FemtoScience will develop and demonstrate a new technology to achieve an advanced accelerometer that enhances an Inertial Measurement Units high-g operability. This accelerometer provides smaller, lighter, more robust, less expensive devices, compatible with known production methodologies. To achieve the required performance a novel material, deposited diamond, (not silicon-based, to ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government