You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Non-Pneumatic Tire for On-Highway and Off-Road Mobility

    SBC: INDIANA TOOL & MFG. CO., INC.            Topic: A18101

    The purpose of this proposal is to demonstrate the feasibility, through modeling and simulation, of integrating engineered polyhedral Phase Transforming Cellular Matrix (PXCM) materials as a dynamic, elastically deformable solution for non-pneumatic tires that can; 1) resist loss of mobility due to hazards that include ballistic/explosive threats, and road debris, 2) extend capability allowing the ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Development of a Modular, Open-Architecture, Integrated, and Validated Mobility Prediction Capability

    SBC: Advanced Science And Automation Corp            Topic: A18105

    The objective of this project is to develop a modular, open-architecture, physics-based ground vehicle mobility prediction software tool for world-wide terrains that are encountered in military applications including on-road and off-road soft soil terrains. The tool will integrate three modules: (1) Physics-Based Vehicle-Terrain Modeling tool; (2) Geographic Information System (GIS); and (3) Stoch ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Development of a Novel Virus Capture System Using Positively Charged Silica Matrix

    SBC: SCIENTIFIC METHODS INC            Topic: 04NCERC1

    The need for a simple, reliable, efficient, and inexpensive virus capture system is an essential step for detecting viruses, such as adenoviruses, caliciviruses, coxsackieviruses, and echoviruses on the Contaminant Candidate List 2 and found in water supplies. The currently available methods are membrane-based techniques that require preconditioning water samples before filtration or expensive fi ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction

    SBC: ADIABATICS INC            Topic: A04250

    The future generation of both military and commercial diesel engines will operate at significantly higher temperatures and pressures than today's engines. The future combat system diesel engine operating parameters demand significant design improvement of in cylinder insulation. Increased cylinder pressure and reduced cooling requirements, heat energy recovery in the exhaust gas by turbo chargin ...

    SBIR Phase I 2005 Department of DefenseArmy
  6. Compact Turbochargers for High Power Density Diesel Engines

    SBC: ADIABATICS INC            Topic: A05237

    A high-power density, low specific heat rejection diesel engine design for traditional and hybrid future combat system (FCS) vehicle configurations is being proposed. The total propulsion system of the vehicle hybrid configuration will fit the future vehicle assigned space/volume by TACOM's vehicle concept laboratory. The proposed engine will have a high-pressure common rail fuel injection syste ...

    SBIR Phase I 2005 Department of DefenseArmy
  7. Advanced Stress Measurement Technologies for Small Turbine Engines

    SBC: AERODYN ENGINEERING, INC.            Topic: A04083

    Aerodyn proposes to develop a new concept in slip ring design that would culminate in a new class of high speed slip rings that could operate up to 90,000 RPM with 50 contacts (25 channels), be capable of handling temperatures up to 700 °F without external cooling support, have a bandwidth of 200 KHz, weigh less than 2 lb, and be designed to directly support new developments in small turboshaft e ...

    SBIR Phase I 2005 Department of DefenseArmy
  8. Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction

    SBC: ANALYTICAL ENGINEERING INC            Topic: A04250

    This program proposes to develop advanced thermal barrier coatings and an advanced thermal insulating exhaust port runner to reduce high power density diesel engine heat rejection. Analytical Engineering, Inc. along with APS-Materials, Inc. and Ceradyne Thermal Materials will develop and bench test thermal barrier coatings that will address the important issues of thermal insulating effectiveness ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. Robotic High Intensity Focused Ultrasound (HIFU) Manipulator System for Critical Systems for Trauma and Transport (CSTAT)

    SBC: FOCUS SURGERY INC            Topic: A05T032

    It has been demonstrated that High Intensity Focused Ultrasound (HIFU) can be employed to rapidly and non-invasively induce hemostasis in severed, hemorrhaging organs. A need exists to use this technology in current and future Critical Systems for Trauma and Transport (CSTAT) systems to improve battlefield medicine to save lives. For this purpose, a robust and easy to use CSTAT-compatible hemostat ...

    STTR Phase I 2005 Department of DefenseArmy
  10. Development of an Intelligent Design Information Management System

    SBC: IMAGINESTICS, LLC            Topic: A05227

    The US Army is currently faced with a serious obstcale in its effort to undertake rapid and cost efficient upgrade of its weapons platforms due to the inability of CAD applications to archive and retrieve existing design information. This inability is mainly due to the lack of an archival system to store important design information and inadequacy of available technologies in allowing efficient ...

    SBIR Phase I 2005 Department of DefenseArmy
US Flag An Official Website of the United States Government