Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Amorphous Alloy Coatings for Hard Chromium Replacement

    SBC: Integran Technologies U.S.A. Inc.            Topic: N/A

    Hard chromium coatings (0.25 to10 mil thick) are used extensively for imparting wear and erosion resistance to components in both industrial and military applications. The most common means of depositing hard chromium has been through the use of chromic acid baths containing hexavalent chromium (Cr+6). However, as a result of its toxicity, exposure levels of Cr+6 have been limited. An alternati ...

    SBIR Phase I 2009 Environmental Protection Agency
  2. A CHEMICAL PROCESS TO TREAT SPENT POTLINERS AND PRODUCE SEVERAL RECYCLABLE COMMERCIALLY VALUABLE PRODUCTS

    SBC: Vortec Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  3. Amorphous Alloy Surface Coatings for Hard Chromium Replacement

    SBC: Integran Technologies U.S.A. Inc.            Topic: 08NCERA1

    Hard chromium coatings (0.25 to10 mil thick) are used extensively for imparting wear and erosion resistance to components in both industrial and military applications. The most common means of depositing hard chromium has been through the use of chromic acid baths containing hexavalent chromium (Cr+6). However, as a result of its toxicity, exposure levels of Cr+6 have been limited. An alternati ...

    SBIR Phase I 2009 Environmental Protection Agency
  4. Plasma-Enhancement of Absorbers for Improved Removal of PFOS and PFOA from Water

    SBC: AA Plasma LLC            Topic: 17NCER1A

    New regulations and advisory levels for perfluoroalkyl substances have resulted in increased drinking water treatment costs or abandonment of drinking water sources. Treatment technologies are needed that can achieve low parts-per-trillion levels. Presently, there are insufficient treatment technologies that can destructively remove perfluorooctanoic acid (PFOA) and/or perfluorooctane sulfonic aci ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. Simulation of Critical Interior Ballistic Effects

    SBC: 3c Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  6. High Velocity Particle Consolidation Utilizing Liq

    SBC: Advanced Cooling Technologies, Inc.            Topic: A09050

    This Small Business Innovative Research Phase I project will develop an innovative High Velocity Particle Consolidation system using liquid particle acceleration mechanisms for Cold Spray applications. Conventional Cold Spray uses high pressure process gas to accelerate particles to a critical velocity, so that upon impact with a substrate, the particles plastically deform and create a coating. ...

    SBIR Phase I 2009 Department of DefenseArmy
  7. Permanent magnets with extremely high energy product for electromechanical devices

    SBC: ADVANCED MATERIALS CORP.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  8. Optimally Designed Wireless Seismic/Acoustic Ordnance Impact Characterization System

    SBC: ABL ENGINEERING LLC            Topic: A09099

    We propose to study development of a wireless network of seismic/acoustic/GPS sensors to carry out the ordnance-impact characterization. We propose to modify an existing design that includes a three-componenent seismograph (sampled at 10kHz), a microphone, and a high-precision GPS receiver. These data are optimally subsampled and wirelessly transmitted over an 802.15 ("zigbee"-like) Personal Are ...

    SBIR Phase I 2009 Department of DefenseArmy
  9. Advanced Ferroelectric Materials for Explosive Pulsed Power for Missiles and Munitions

    SBC: TRS CERAMICS, INC.            Topic: A08138

    In this program TRS will explore a variety of new ferroelectric materials and composites for explosively driven pulsed power applications. The Phase I program will be aimed at demonstrating the feasibility of improving the FEG performance by: (a) systematically exploring new materials to enhance the remanent polarization in ferroelectric (FE) to antiferroelectric (AFE) phase-change compositions; ...

    SBIR Phase II 2009 Department of DefenseArmy
  10. Advanced Ferroelectric Materials for Explosive Pulsed Power for Missiles and Munitions

    SBC: TRS CERAMICS, INC.            Topic: A08138

    In this program TRS will explore a variety of new ferroelectric materials and composites for explosively driven pulsed power applications. The Phase I program will be aimed at demonstrating the feasibility of improving the ferroelectric generator (FEG) performance by: (a) systematically exploring new materials to enhance the remanent polarization in ferroelectric (FE) to antiferroelectric (AFE) p ...

    SBIR Phase I 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government