You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F, LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  2. Low-Output High Precision Automated Powder Disseminator

    SBC: ADVANCED MECHANICAL SYSTEMS TECHNOLOGY,            Topic: CBD06101

    This proposal presents a Phase I SBIR project to develop a high precision, low disperse rate powder disseminator for the US Army. In the development of the sensitive detecting agent, we need to release a precise amount of C&B agents in the controlled detection experiments. However, such a technology does not exist at the present time. After examining existing technologies, we believe that the r ...

    SBIR Phase I 2006 Department of DefenseOffice for Chemical and Biological Defense
  3. Improved Miller Fasteners Based on 3-D Braided Preforms

    SBC: 3TEX, Inc.            Topic: N06033

    Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...

    SBIR Phase I 2006 Department of DefenseNavy
  4. Ambient Power Supply for On-Board Vehicle Health Monitoring MEMS Sensors

    SBC: AMBIENT MICRO            Topic: AF06170

    To support its use of MEMS sensors for vehicle health monitoring, the Air Force seeks to couple the harvesting of ambient energy sources with a micro energy storage device. Microbatteries have demonstrated their viability as a high density power source, but their short operating life limits their usefulness. To extend the operating life of microbatteries, ambient energy sources can be used to co ...

    SBIR Phase I 2006 Department of DefenseAir Force
  5. Rapid Detection of Acetylcholinesterase-Inhibiting Pesticides in Water Using a Handheld Assay and Reader

    SBC: ANP TECHNOLOGIES, INC.            Topic: A06159

    We propose that a comparative colorimetric assay be developed that will use a ticket of the same dimensions as the current ANP immunoassay tickets. This will allow the AChE test to be conducted using a similar workflow as the lateral flow immunoassay-based HHAs and be similarly read on the ANP reader to yield an unambiguous result independent of user judgment.

    SBIR Phase I 2006 Department of DefenseArmy
  6. High Sensitivity Rugged Array Detectors for Field Deployed Instruments: Low-Light Level Camera for Laser-Induced Breakdown Spectroscopy (LIBS) and Ram

    SBC: B & W Tek Inc.            Topic: A06065

    Low-light-level photodetector arrays are proposed for detecting the weak optical emission spectra from the trace atoms in the laser-induced breakdown spectroscopy (LIBS). The proposed semiconductor image intensifier and low-light-level camera utilize the miniaturized and monolithically integrated version of a proven solid-state detector technology, and is expected to be able to detect femto-watts ...

    SBIR Phase I 2006 Department of DefenseArmy
  7. Enhanced Realtime Millimeter Wave Imaging Using Hardware Acceleration

    SBC: EM PHOTONICS INC            Topic: N06079

    While the need for effective millimeter wave (mmW) imaging systems is clear, there remains a significant gap in the technology needed to realize it, namely the ability to process and enhance mmW imagery in a real-time manner. This is particularly important because raw mmW images appear very fuzzy, are color mapped, and have regions of intensity that are not normally associated with visible and IR ...

    SBIR Phase I 2006 Department of DefenseNavy
  8. Recycling Composite Scrap and Waste Materials

    SBC: FIREBIRD ADVANCED MATERIALS, INC.            Topic: AF06081

    Recycling of composites manufacturing scrap and end-of-life waste is expected to become more important as the use of composite materials expands into different applications. Carbon Fiber Reinforced Polymer (CFRP) wastes especially are a potentially valuable source of recycled carbon fibers if an economic and environmentally friendly technology for recycling these fibers can be developed. The Pha ...

    SBIR Phase I 2006 Department of DefenseAir Force
  9. Automation of Equipment/System Isolation and Safety Tag-out for Maintenance Actions

    SBC: FOARD SYSTEMS DESIGN, INC.            Topic: N05160

    The proposal outlines the use of rapid protyping techniques to create a functional small scale feasibility system and documentation to provide a demonstration of the features needed in a full-scale automated isolation and tag-out system. It will use a highly innovative, patented network control technology that provides a reliable, low cost means to interconnect thousands of remote sensor and cont ...

    SBIR Phase I 2006 Department of DefenseNavy
  10. Modeling and Prediction of Asymmetric Threat Learning Processes

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: N06077

    The USN is seeking innovative solutions to model and aid in the prediction of enemy course of action with emphasis on learning, adaptation, and intent. While analysts and strategists are well-versed in tracking threats against conventional military targets, the new asymmetric threats posed by insurgents and terrorist organizations alike, are much more difficult to anticipate. Given the events and ...

    SBIR Phase I 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government