You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Portable Programmable Multifunction Body Fluids Analyzer

    SBC: ADVANCED LIQUID LOGIC            Topic: X1103

    Advanced Liquid Logic proposes to develop a very capable analyzer based on its digital microfluidic technology. Such an analyzer would be:  Capable of both simple and complex biological assays  Small, lightweight, power efficient, and easy to operate  Fully programmable and remotely reprogrammable Under NIH funding we have demonstrated clinical chemistry blood diagnostic testing on our ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  2. Gradient Interphase, 3-D Fiber Architecture CMC's

    SBC: 3TEX, Inc.            Topic: N/A

    A clear need exists for the next generation of Ceramic Matrix Composites (CMC) for Thermal Protection Systems (TPS), propulsion hardware, and other high temperature applications. No "off-the-shelf" materials and/or processes capable of meeting NASA's goals are available, yet completely integrating a unique combination of commercially available or nearly commercially available technologies can m ...

    STTR Phase I 2006 National Aeronautics and Space Administration
  3. Processor for Real-Time Atmospheric Compensation in Long-Range Imaging

    SBC: EM PHOTONICS INC            Topic: O203

    Range surveillance is a critical component of space exploration because of its implications on safety, cost, and overall mission timeline. However, launch delays, due to the difficulty of verifying a cleared range, are common and will increase as spaceports are developed in new areas. In order to expedite range clearance, it is vital to see "through" the atmosphere. Unfortunately, the quality ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  4. Broadband Advanced Spectral System

    SBC: INNOVATIVE TECHNICAL SOLUTIONS, INC.            Topic: S603

    NovaSol proposes to develop an advanced hyperspectral imaging system for earth science missions named BRASS (Broadband Advanced Spectral System). BRASS combines state-of-the-art, existing NASA detector technology and proven electronics with a novel spectrometer design to provide a compact instrument that covers the full wavelength range from 0.4 to 5 ?m. Applications for such an instrument range f ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  5. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  6. High-Density Diffraction Imaging and Non-Imaging Grating Elements for EUV and X-ray Spectroscopy Fabricated by DUV Reduction Photolithography

    SBC: LightSmyth Technologies            Topic: S404

    There is a need for lightweight high-density (4000+ lines/mm) novel diffraction grating elements in modern telescopes to advance EUV and X-ray astrophysics. Current grating technologies (ruling and holographic beam interference) do not provide optimal solution for all grating requirements. In response to NASA request, we propose to apply state-of-the art DUV reduction photolithographic tools dev ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  7. Model-Based Design Tools for Extending COTS Components To Extreme Environments

    SBC: Lynguent, Inc.            Topic: S402

    The innovation in this project is model-based design (MBD) tools for predicting the performance and useful life of commercial-off-the-shelf (COTS) components and COTS-based systems beyond their rated temperature range. Phase I results have shown the feasibility of these tools, which consist of novel modeling tools and advanced system and data analysis capability. The modeling tools differ from all ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  8. Tank Bladders for Advanced Monopropellants

    SBC: MICROPHASE COATINGS, INC.            Topic: S804

    In response to RFP S8.04 Spacecraft Propulsion, innovations in propulsion technologies are needed to increase the capabilities of the Science Mission Directorate (SMD) spacecraft. Towards this need, MicroPhase Coatings, Inc. (MPCI) proposes tank bladders compatible with advanced monopropellants. MPCI is well underway in development of polymer liners for lightweight propulsion tanks for containme ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  9. Fast Picometer Mirror Mount

    SBC: Nightsky Systems, Inc.            Topic: S404

    The proposed innovation is a 6DOF controllable mirror mount with high dynamic range and fast tip/tilt capability for space based applications. It will enable the actuation of large (~1m) mirrors over centimeter stroke with low bandwidth to correct deployment errors, provide sub-micron correction of thermal distorsion with picometer precision, and enable nanometer/nanoradian tip/tilt wavefront cor ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  10. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: Oceanit Laboratories, Inc.            Topic: SOCOM04007

    The current project will develop and demonstrate a prototype compact, power-efficient all-fiber lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current fiber-laser based lidar development efforts. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts in the current project will include prototype s ...

    SBIR Phase II 2006 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government