List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  2. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F, LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  4. Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems

    SBC: 3TEX, Inc.            Topic: AF04249

    In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...

    SBIR Phase II 2006 Department of DefenseAir Force
  5. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...

    SBIR Phase II 2006 Department of DefenseAir Force
  6. Ambient Power Supply for On-Board Vehicle Health Monitoring MEMS Sensors

    SBC: AMBIENT MICRO            Topic: AF06170

    To support its use of MEMS sensors for vehicle health monitoring, the Air Force seeks to couple the harvesting of ambient energy sources with a micro energy storage device. Microbatteries have demonstrated their viability as a high density power source, but their short operating life limits their usefulness. To extend the operating life of microbatteries, ambient energy sources can be used to co ...

    SBIR Phase I 2006 Department of DefenseAir Force
  7. Response Management for Counterspace and SSA Operations

    SBC: CLEVERSET, INC.            Topic: AF06283

    The foundation of any counterspace capability is space/counterspace situation awareness. Existing AFRL/VS funded efforts have established a foundation for robust, multi-level situation awareness through multi-source, multi-level, data fusion. However, situation awareness is only useful to the extent that it informs response to threats, whether natural or man-made. AFRL/VS Space Awareness & Respons ...

    SBIR Phase I 2006 Department of DefenseAir Force
  8. Hardware Accelerated Simulator for Scattering from Electrically Large Objects and Scenes

    SBC: EM PHOTONICS INC            Topic: AF05220

    Over the past few decades, computational electromagnetics (CEM) researchers have been making steady progress towards the development of efficient algorithms, such as the Method of Moments (MoM), for simulating scattering from electrically large targets. Unfortunately, such techniques have proved too computationally demanding because they require the solution of an often very large and dense matri ...

    SBIR Phase II 2006 Department of DefenseAir Force
  9. Development of Advanced Polymer Based Photonic Crystal Devices and Fabrication Processes

    SBC: EM PHOTONICS INC            Topic: AF05135

    Photonic crystals have led the way for miniaturizing application specific optical integrated circuit (ASOIC) to a scale comparable to the wavelength of light which in turn made them a good candidate for next generation high-density optical systems and interconnects. Polymer based Photonic Crystal structures have potential applications in optical integrated circuits, optoelectronics, optical switch ...

    SBIR Phase II 2006 Department of DefenseAir Force
  10. Reconfigurable Nanophotonic Optical Interconnects for Advanced FPGAs

    SBC: EM PHOTONICS INC            Topic: AF06T006

    Optically interconnected systems provide a number of additional benefits. For example, by removing metallic traces, many signal integrity issues are also eliminated as the parasitic capacitance and inductance associated with high-speed lines are removed, which further improves systems performance. Additionally, such systems typically require less power and experience less leakage, or wasted power ...

    STTR Phase I 2006 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government