You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Universal Longwire Antenna Module for Unmanned Aerial Vehicles and Aircraft

    SBC: Sciperio, Inc.            Topic: SOCOM06003

    A longwire antenna module is proposed, incorporating a length reduction technique that yields 25-75% length reduction with minimal impact on gain. A resonant monopole antenna operating at 535kHz is approximately 440ft long; length reduction techniques will reduce this to between 69ft and 134ft depending upon the desired gain. A shorter/lighter longwire antenna will allow the aircraft to be more ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  2. Conformal Appliqué Antennas for Unmanned Aerial Vehicles and Aircraft

    SBC: Sciperio, Inc.            Topic: SOCOM06002

    An antenna system is proposed for the purpose of FM, TV-VHF, and TV-UHF PSYPOS broadcast applications. The antenna system incorporates a radiating structure that is small, light weight, and conformal. A circularly polarized beam is broadcast from an aircraft towards nadir, illuminating the region below the craft with a horizontally-polarized signal, yielding polarizations pointing in both the No ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  3. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  4. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: OCEANIT LABORATORIES INC            Topic: SOCOM04007

    The current project will develop and demonstrate a prototype compact, power-efficient all-fiber lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current fiber-laser based lidar development efforts. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts in the current project will include prototype s ...

    SBIR Phase II 2006 Department of DefenseSpecial Operations Command
  5. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  6. Handheld Multianalyte Biosensor Platform

    SBC: TIRF Technologies            Topic: HSB052001

    The goal of this project is to develop a handheld biosensor for rapid detection of bioanalytes such as proteins, peptides, nucleic acids, toxins, viruses, bacteria and other molecular targets that represent interest for the biodefense area. We propose to build a rugged device, similar to a palm computer, equipped with a disposable sensor cartridge designed for simultaneous detection of multiple ta ...

    SBIR Phase I 2005 Department of Homeland Security
  7. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  8. SMART Hybrid Container System

    SBC: Mariner Container Corp.            Topic: HSB051006

    The global economy has brought about enormous opportunities in the areas of trade with developing nations. Nowhere is it more evident than in the East Asian basin. In 2002, over 12 million TEU containers where imported into the U.S. with over 60% originating in China/Hong Kong. In the same year, only 7 million TEU containers where exported from the U.S. to the rest of the world. What happened to t ...

    SBIR Phase I 2005 Department of Homeland Security
  9. Miniature Quickscan Receiver

    SBC: OCEANIT LABORATORIES INC            Topic: SOCOM04004

    SOF tactical users lack a miniature threat warning receiver that permits them to monitor RF energy and exploit hostile wireless communications while on extended deployments that necessitate very low power budgets. Having this capability will save lives and enhance the probability of successful completion of dangerous missions. The purpose of this Small Business Innovative Research (SBIR) Phase II ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  10. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: OCEANIT LABORATORIES INC            Topic: SOCOM04007

    The current project aims to demonstrate the feasibility of a compact, powerful, power-efficient lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current development efforts building an eye-safe lidar for minute aerosol detection. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts will include ...

    SBIR Phase I 2005 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government