You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Low-Cost, Networked, Disposable Chemical Sensor

    SBC: STREAMLINE AUTOMATION LLC            Topic: SOCOM05010

    There is an acute need for a networked chemical sensor that is inexpensive enough to allow it to be treated as a disposable item - deployed and left in-place until the end of its useful life, or until operations move out of communications range. Electrochemical microarray sensors can be fabricated at low enough unit cost to make the development of a disposable sensor node feasible. These sensors ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  2. A Novel Electrokinetics-Driven, Integrated Microfluidic Cartridge for Sample Preparation from Complex Matrices

    SBC: CFD RESEARCH CORPORATION            Topic: HSB051001

    Sample preparation has been recognized as the single most important challenge to be faced in the development of detect-to-warn (DTW) systems (NRC, 2005). Available commercial sample preparation technologies are expensive, slow (30 min to 2 hours) and require trained laboratory technicians for operation. Addressing this need, we propose to design, fabricate, demonstrate, and validate a novel integr ...

    SBIR Phase II 2006 Department of Homeland Security
  3. Novel Electrostatics-based Sampler for Bioaerosol Collection in Small Analysis Volumes

    SBC: CFD RESEARCH CORPORATION            Topic: HSB061001

    Current bioaerosol monitoring and evaluation systems are largely based on collection of airborne pathogens in a liquid medium, followed by the detection of the targets of interest. While available aerosol collection technologies employ large collection volumes, biosensors are capable of processing only a small fraction of the collection volume. Our overall objective is to design and demonstrate a ...

    SBIR Phase I 2006 Department of Homeland Security
  4. Automated Feature Extraction Capabilities for the Development of High-Resolution GEOINT Feature Data and Constructing Correlated Databases

    SBC: CG2, Inc.            Topic: SOCOM06012

    Our solution to the automated feature extraction problem will leverage the material properties that can be inferred from combining multispectral imagery with high resolution elevation data or LIDAR data using a trainable knowledge base. Multiple imaging bands provide a more complete picture of the material involved than ordinary RGB. This can help distinguish between a green grass lawn and a gre ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  5. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  6. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: OCEANIT LABORATORIES INC            Topic: SOCOM04007

    The current project will develop and demonstrate a prototype compact, power-efficient all-fiber lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current fiber-laser based lidar development efforts. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts in the current project will include prototype s ...

    SBIR Phase II 2006 Department of DefenseSpecial Operations Command
  7. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  8. Handheld Multianalyte Biosensor Platform

    SBC: TIRF Technologies            Topic: HSB052001

    The goal of this project is to develop a handheld biosensor for rapid detection of bioanalytes such as proteins, peptides, nucleic acids, toxins, viruses, bacteria and other molecular targets that represent interest for the biodefense area. We propose to build a rugged device, similar to a palm computer, equipped with a disposable sensor cartridge designed for simultaneous detection of multiple ta ...

    SBIR Phase I 2005 Department of Homeland Security
  9. A Novel Electrokinetics-Driven, Integrated Microfluidic Cartridge for Sample Preparation from Complex Matrices

    SBC: CFD RESEARCH CORPORATION            Topic: HSB051001

    Sample preparation has been recognized as the single most important challenge to be faced in the development of detect-to-warn (DTW) systems (NRC, 2005). Available commercial sample preparation technologies are expensive, slow (30 min to 2 hours) and require trained laboratory technicians for operation. Addressing this need, we propose to design, fabricate, and demonstrate a novel integrated micro ...

    SBIR Phase I 2005 Department of Homeland Security
  10. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government