Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 3WEAVE Fabric Composite and Sandwich Core Panels for Blast Protection

    SBC: 3TEX, Inc.            Topic: N/A

    The new material technology is based on 3D weaving for the reinforcement of buildings against both bomb blast and mitigation of the damage caused by flying objects. Four alternatives will be considered for the Phase I work dry 3D fabric, solid composite, sandwich core structures, and combination of these.

    SBIR Phase I 2008 Department of Homeland Security
  2. WISPER (Wireless Intelligent Sensor Platform for Emergency Responders)

    SBC: Oceanit Laboratories, Inc.            Topic: HSB072004

    Oceanit proposes to develop a low cost, reliable, wireless mesh networking system that will enable remote monitoring and tracking of sensors on emergency responders in hostile building environments. The heart of the system will use a commercial-off-the-shelf (COTS) wireless mesh networking IC platform for low-power and low-cost communications. By using a wireless mesh network, low-power wireless t ...

    SBIR Phase II 2008 Department of Homeland Security
  3. Improved Silicon Drift Detector Coincidence Rejection for Digital Pulse Processors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in Energy Dispersive x-ray Spectroscopy (EDS), has made possible x-ray event streams with input count rates in the range of 1-10 Mcps. Modern digital pulse processors are therefore required to run at fast time constants to achieve reasonable throughput; however, this causes significant coincidence artifacts to appear in the spectrum ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  4. RBAC-Based Workflow

    SBC: Virtual Globe, Inc. (Rockwise)            Topic: N/A

    Under this proposal, Virtual Global, Inc. proposes to work with NIST to develop RBAC-BASED WORKFLOW, a workflow system that will use RBAC in a web services model as a form of middleware that can be "packaged" accessed, configured, and reused by integrating with existing trusted RBAC implementations.

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  5. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel proposes to develop fiber-coupled near-infrared avalanche photodiode (APD) receivers with photon detection efficiency (PDE) and dark count rate (DCR) with more than two orders of magnitude faster maximum count rate (MCR) than Geiger-mode APDs, which are constrained by a fundamental tradeoff between DCR and MCR: if the APD is cooled to reduce DCR, then its dead time must increase to avoid af ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  6. Innovative Low-cost, In-situ Consolidation Head for Complex Geometry Thermoplastic Fiber Placement

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N08135

    Accudyne proposes a SBIR program, endorsed by Sikorsky, Cytec Engineered Materials, and NASA-LaRC, to develop a cost-effective thermoplastic automated tow placement (ATP) process and demonstrate it by fabricating and testing a complex contoured skin (Phase 1) and a CH-53K rotorcraft lower cabin or ramp skin (Phase 2). The process employs in situ consolidation, avoiding the autoclave. The targete ...

    SBIR Phase I 2008 Department of DefenseNavy
  7. Innovative Approaches to the Fabrication of Composite Rotary Wing Main Rotor Blade Spars

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N08026

    This proposal will supply to NAVAIR and to rotorcraft manufacturing companies the emerging solution to their fabrication needs as it relates to the production of Rotor Blade Spars. The process and machine concept developed in Phase I will provide NAVAIR and the rotocraft manufacturing companies an automated solution to spar manufacturing. This will enable: • Low part manufacturing cost • High ...

    SBIR Phase I 2008 Department of DefenseNavy
  8. High Temp Standoff Dielectric Antenna Windows Based on 3-D Woven Preforms

    SBC: 3TEX, Inc.            Topic: N08071

    The speed of supersonic cruise missiles generates surface temperatures that can exceed the limitations of even high temperature structural metals like titanium. Insulation to protect electronics equipment in the missile is typically a parasitic thermal protection system. A multi-functional solution that has the potential of revolutionizing the design and performance of missiles, re-entry vehicles ...

    SBIR Phase I 2008 Department of DefenseNavy
  9. Improved Miller Fasteners Based on 3-D Braided Preforms

    SBC: 3TEX, Inc.            Topic: N06033

    Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...

    SBIR Phase II 2008 Department of DefenseNavy
  10. A compact, low cost, in- process welding defects detection system based on thermal plasma emission

    SBC: ALPHASENSE, INC.            Topic: N08178

    In this proposal, AlphaSense, Inc. (AI) and the University of Michigan (UM) detail the development of a compact, portable, and low cost in-process weld defects detection system. Key innovations of the proposed system include: a) weld defects monitoring based on plasma emission characteristics; b) use the electron temperature of the plasma as an indicator of the weld quality, c) use multiple plasma ...

    SBIR Phase I 2008 Department of DefenseNavy
US Flag An Official Website of the United States Government