Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 3WEAVE Fabric Composite and Sandwich Core Panels for Blast Protection

    SBC: 3TEX, Inc.            Topic: N/A

    The new material technology is based on 3D weaving for the reinforcement of buildings against both bomb blast and mitigation of the damage caused by flying objects. Four alternatives will be considered for the Phase I work dry 3D fabric, solid composite, sandwich core structures, and combination of these.

    SBIR Phase I 2008 Department of Homeland Security
  2. WISPER (Wireless Intelligent Sensor Platform for Emergency Responders)

    SBC: Oceanit Laboratories, Inc.            Topic: HSB072004

    Oceanit proposes to develop a low cost, reliable, wireless mesh networking system that will enable remote monitoring and tracking of sensors on emergency responders in hostile building environments. The heart of the system will use a commercial-off-the-shelf (COTS) wireless mesh networking IC platform for low-power and low-cost communications. By using a wireless mesh network, low-power wireless t ...

    SBIR Phase II 2008 Department of Homeland Security
  3. Improved Silicon Drift Detector Coincidence Rejection for Digital Pulse Processors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in Energy Dispersive x-ray Spectroscopy (EDS), has made possible x-ray event streams with input count rates in the range of 1-10 Mcps. Modern digital pulse processors are therefore required to run at fast time constants to achieve reasonable throughput; however, this causes significant coincidence artifacts to appear in the spectrum ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  4. RBAC-Based Workflow

    SBC: Virtual Globe, Inc. (Rockwise)            Topic: N/A

    Under this proposal, Virtual Global, Inc. proposes to work with NIST to develop RBAC-BASED WORKFLOW, a workflow system that will use RBAC in a web services model as a form of middleware that can be "packaged" accessed, configured, and reused by integrating with existing trusted RBAC implementations.

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  5. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel proposes to develop fiber-coupled near-infrared avalanche photodiode (APD) receivers with photon detection efficiency (PDE) and dark count rate (DCR) with more than two orders of magnitude faster maximum count rate (MCR) than Geiger-mode APDs, which are constrained by a fundamental tradeoff between DCR and MCR: if the APD is cooled to reduce DCR, then its dead time must increase to avoid af ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  6. Deep Submergence Rated Flexible Hoses and Piping System Connectors

    SBC: MEI-CHARLTON, INC.            Topic: SOCOM08002

    The objective of this proposal is to demonstrate the feasibility of developing flex hoses for hydraulic and other piping system interfaces that can withstand high pressure environments, hydrodynamic, and other forces unique to deep submergence system operating environments. This hose and connecter system coined FlexiHOSE© proposed by MEI-Charlton, Inc. (MEIC) will meet the need of operating under ...

    SBIR Phase I 2008 Department of DefenseSpecial Operations Command
  7. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  8. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  9. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: Oceanit Laboratories, Inc.            Topic: SOCOM04007

    The current project will develop and demonstrate a prototype compact, power-efficient all-fiber lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current fiber-laser based lidar development efforts. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts in the current project will include prototype s ...

    SBIR Phase II 2006 Department of DefenseSpecial Operations Command
  10. Individual Cooling Equipment

    SBC: R*BAT, INC.            Topic: SOCOM06009

    Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government