Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Hierarchical Grid Referenced Normalized Display (HiGRND)

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: HSB062005

    In an Urban Search and Rescue (USAR) scenario, the ability for the rescuers to maintain an accurate and comprehensive situational awareness is critical to allow them to maximize their effectiveness in a chaotic and dangerous environment. Timeliness is, of course, paramount to saving lives, and miscommunications lead to potentially unnecessary deaths. 21st Century Systems Incorporated is pleased to ...

    SBIR Phase I 2006 Department of Homeland Security
  2. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  3. Integrally 3D Woven/3D Braided Composite Joining Elements For Ship Construction

    SBC: 3TEX, Inc.            Topic: N04093

    During Phase I, 3TEX designed universal, one-piece, 3D woven fiber preforms which can be used as either a “Butt” (H) joint or as a “P” joint as needed. Composite joints were fabricated and tested, demonstrating the benefit of the integral nature of the 3D preforms. 3D stress/strain and crack propagation analysis of composite Π-joint was performed using 3D MOSAIC code. 3D displacement, st ...

    SBIR Phase II 2006 Department of DefenseNavy
  4. 3-D Fiber Reinforced, Thermally Conductive Rotor Sheaths

    SBC: 3TEX, Inc.            Topic: N06T013

    Military helicopters rotors contend with rain, ice, sand, and flying debris. To prevent damage to the expensive blade protective sheaths or coatings are applied to the leading edge of the rotor blades. A 3-D woven composite sheath with high thermal conductivity fibers running through the thickness can offer the best qualities of both metal sheaths and elastomer coatings. Infused with an elastom ...

    STTR Phase I 2006 Department of DefenseNavy
  5. Improved Miller Fasteners Based on 3-D Braided Preforms

    SBC: 3TEX, Inc.            Topic: N06033

    Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...

    SBIR Phase I 2006 Department of DefenseNavy
  6. Expendable Electro-Optic Infrared Camera System

    SBC: CLOUD CAP TECHNOLOGY            Topic: N05138

    Cloud Cap Technology is proposing to develop a stabilized pan tilt zoom camera gimbal system for the Coyote sonobuoy tube launched UAV. Cloud Cap is the maker of the Piccolo autopilot, which is used in many UAV systems, including the prototype of the Coyote. In the spring of 2006 Cloud Cap will introduce a new product, the TASE stabilized pan tilt zoom camera system for small UAVs. TASE is almo ...

    SBIR Phase I 2006 Department of DefenseNavy
  7. Near-infrared Optical Biosensor for Brain Injury Evaluation

    SBC: Electrical Geodesics, Inc.            Topic: OSD04DH4

    Based on direction from Dr. Amy Kru

    SBIR Phase II 2006 Department of DefenseNavy
  8. Enhanced Realtime Millimeter Wave Imaging Using Hardware Acceleration

    SBC: EM PHOTONICS INC            Topic: N06079

    While the need for effective millimeter wave (mmW) imaging systems is clear, there remains a significant gap in the technology needed to realize it, namely the ability to process and enhance mmW imagery in a real-time manner. This is particularly important because raw mmW images appear very fuzzy, are color mapped, and have regions of intensity that are not normally associated with visible and IR ...

    SBIR Phase I 2006 Department of DefenseNavy
  9. Automation of Equipment/System Isolation and Safety Tag-out for Maintenance Actions

    SBC: FOARD SYSTEMS DESIGN, INC.            Topic: N05160

    The proposal outlines the use of rapid protyping techniques to create a functional small scale feasibility system and documentation to provide a demonstration of the features needed in a full-scale automated isolation and tag-out system. It will use a highly innovative, patented network control technology that provides a reliable, low cost means to interconnect thousands of remote sensor and cont ...

    SBIR Phase I 2006 Department of DefenseNavy
  10. Cross-Domain Document-Based Collaboration in a Multi-Level-Secure Environment

    SBC: Galois, Inc.            Topic: N05085

    Our method of enabling cross-domain collaboration allows documents whose contents have a mixture of sensitivity levels to be viewed and edited by users with differing clearance levels, while maintaining the requisite security constraints. In particular, we've identified the following key technical requirements: *Multi-level documents: single documents may contain multiple sections of varying class ...

    SBIR Phase II 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government