You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  2. Precision 10 kV Programmable Voltage Source

    SBC: Low Thermal Electronics, Inc.            Topic: NA

    Low Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volts version. This instrument will improve state-of-the-art measurements in high resis ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  3. Unstructured Mesh Technologies for Massively Parallel Simulation and Data Analysis of Magnetically Confined Plasmas

    SBC: SIMMETRIX, INC.            Topic: 23c

    The simulation of magnetically confined plasmas requires consideration of multiple overlapping scales. Continuum models address reactor scale behaviors, while particle methods capture fine scale behavior. The complex combination of physics and reactor geometry results in simulations involving massive calculations and data sets, which can only be executed on parallel computers. Thus, there is a cri ...

    SBIR Phase II 2018 Department of Energy
  4. Commercialization of an Ultra-Thin, Bendable, High Efficacy OLED Light Engine

    SBC: OLEDWORKS LLC            Topic: 10b

    OLED lighting panels have been available commercially for several years, with relatively slow adoption into commercial and consumer fixtures in the US. This project addresses both channels through the commercialization of an ultra-thin, bendable, high-efficacy OLED light engine in which a panel and driver are engineered together in one low-cost, easy-to-use package. The most significant benefit of ...

    SBIR Phase II 2018 Department of Energy
  5. Rapid Assessment of Distribution Line Damage via Autonomous UAV

    SBC: BRAINS4DRONES LLC            Topic: 05b

    Two-thirds of all electric outage minutes are weather-related, mostly the result of damage to above ground distribution lines. These outages cost the U.S. economy between $18 and $33 billion per year. We propose to rapidly assess line damage immediately following an extreme weather event using specially equipped unmanned aerial vehicles (UAVs). Efforts to restore power start with the utility’s s ...

    SBIR Phase II 2018 Department of Energy
  6. Advanced Compliant Foil Bearings and Seals for Supercritical CO2

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: 29f

    Supercritical CO2 power cycles offer the promise of high efficiency in a compact footprint with a potential to offer disruptive changes to the US energy infrastructure. Applications include bottom cycles for electric co-generation power plants, nuclear power production, concentrated solar and other renewables as well as propulsion engines for space propulsion. Aerodynamic design theory dictates th ...

    SBIR Phase II 2018 Department of Energy
  7. Supporting Multi-Physics Workflowsfor Advanced Nuclear Reactor Simulation

    SBC: KITWARE INC            Topic: 29d

    The US Department of Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) Toolkithas accelerated both the solutions to existing problems and deployment of new designsfor current and advanced reactors. The task of coupling these tools into integrated workflows has now become a significant impediment to timely, cost-effective modeling and simulation for ad- vanced nuclear system design ...

    SBIR Phase II 2018 Department of Energy
  8. Integrated, Interoperable Software Environment for Fusion Simulation and Data Analysis Tools

    SBC: KITWARE INC            Topic: 20c

    The promise of fusion energy is enormous - an energy system whose fuel is obtained fromsimple ingredients, and which yields zero carbon emissions to the atmosphere. However, realizing this vision requires undertaking one of the most challenging programs of scientific research and development that has ever been undertaken. Predictive simulation plays a crucial role in fusion energy research. Such s ...

    SBIR Phase II 2018 Department of Energy
  9. Development of the Ultra-Low Loss Superconducting Resonators Integrated with Detectors for Frequency-Domain Multiplexing Readout of Future Cosmic Microwave Background Experiments

    SBC: HYPRES INC            Topic: 28f

    Superconducting transition edge sensors are a key technology for measuring the Cosmic Microwave Background radiation leftover from the early universe. To reach the large number of sensors (~400,000-500,000) needed for next generation experiments, solutions must be found to reduce time, weight, size, and cost of the sensor arrays. This project addresses these issues by both integrating the sensors ...

    SBIR Phase II 2018 Department of Energy
  10. Free Piston Linear Motor Whole Air Compressor for Treaty Monitoring

    SBC: KAI, LLC            Topic: 04a

    Under the Department of Energy’s Ground-based Nuclear Detonation Research and Development (GNDD R&D) Program, the Air Force Technical Application’s Center (AFTAC) monitors for nuclear explosions through high altitude whole-air gas sampling using compressors to inject air into a high-flow air stream or store in a high-pressure vessel. The existing compressors have proven reliability issues with ...

    STTR Phase II 2018 Department of Energy
US Flag An Official Website of the United States Government