Award Data

Nanometrology International, Inc. (NMI) proposes to demonstrate the feasibility of 3-dimensional (3D) characterization of nanoscale objects using scanning probe microscopy (SPM) with a measurement uncertainty of less than 0.7 nm. To accomplish this task, we propose a novel method of 3D tip characterization and use of an innovative surface reconstruction algorithm recently introduced by NIST and th ...

The technical objective of this project is to develop a prototype of a face recognition application in a cloud computing environment utilizing MBARK as the middleware. The application will have a client piece that will run on a mobile device such as a laptop and a server piece that will run on a higher-performance computing cluster. The specific objectives of this development project can be enumer ...

This Phase 2 project targets the completion of the development of an improved system for the broadcasting of the WWVB signal, as a direct continuation of the Phase 1 project, which successfully validated the proposed approach through a feasibility study and analyses. Objectives of this project include the design of the new modulation scheme and protocol, the development of a new time-code generato ...

NASA sees an increasing role in the near future for small satellites in the 5-100 kg size range. A potentially disruptive technology, small satellites are being eyed as platforms for the rapid demonstration of new technologies and important science missions. Currently, small satellite platforms struggle to balance the three critical tasks of collecting enough power, acquiring data and downlinking ...

Impact Technologies has proposed development of an effective prognostic and fault accommodation system for critical DC power systems including PV systems. Overall goal for this program is development of techniques that enable power system fault tolerance based on diagnostic features from the solar cells, power bus, and power transistors. After completion of Phase I efforts towards this goal, Impac ...

NASA is investigating advanced turboelectric aircraft propulsion systems that utilize superconducting motors to drive a number of distributed turbofans. Conventional electric motors are too large and heavy to be practical for this application, and so superconducting motors are required. In order to improve maneuverability of the aircraft, variable speed power converters would be required to thro ...

The objective of the research is the completion of an observation platform for the ISS Light Microscopy Module (LMM) as it currently resides on the U.S. Fluids Integration Rack (FIR). In its current configuration the LMM accommodates a Contained Bubble Experiment, and it has no substage illuminator and limited epi-illumination. There is a need for future use of the LMM in more versatile fluids a ...

The High Melt Coating system is applied to a carbon-carbon structure and embeds HfC, ZrB2 in the outer layers. ACC High Melt builds on the time tested base material system of T-300 fibers, impregnated with phenolic resin, pyrolyzed, densified, and SiC Conversion coatedFor Phase 2, C-CAT proposes to team with Pratt and Whitney Rocketdyne to fully develop High Melt into a material system that when ...

Impact Technologies, LLC in collaboration with the Rochester Institute of Technology, proposes to develop and demonstrate a flight-worthy hardware prototype of a miniature, low cost/weight/ power device that provides stable and highly accurate near continuous positioning, attitude, and inertial measurements while being subjected to highly dynamic maneuvers and high vibration effects. In contrast t ...

This 2009 NASA SBIR Phase 2 proposal for an innovative Miniature Laser Magnetometer (MLM) is a response to subtopic S1.06 Particles and Field Sensors and Instrument Enabling Technologies. The MLM instrument will incorporate a number of technical innovations to achieve high-sensitivity and high-stability performance while significantly reducing the size of the laser-pumped helium magnetometer for u ...