You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Advanced Manufacturing and Material Measurements Software Tool WEAVE for the Accelerating and Automation of SEM image analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: 90

    The goal of this proposal is to create the software Weave™ to automate the extraction of critical dimensions (CDs) from scanning electron microscope (SEM) images for the microelectronics industry. Current best practices for extraction of CDs are that personnel analyze the images one by one, which is tedious, prone to human bias, time-consuming and expensive. Successful implementation of Weave™ ...

    SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology
  2. A High-Throughput Blood Esterase Panel Assay

    SBC: AGAVE BIOSYSTEMS INC.            Topic: CBD10108

    Organophosphorus chemical warfare nerve agents (OP-CWA) are attractive to terrorist groups and rogue states as an inexpensive and accessible technology for chemical warfare. OP-CWA and organophosphate pesticides cause severe neurological symptoms and death by inhibiting the enzyme acetylcholinesterase (AChE); the resulting excess acetylcholine accumulates and overstimulates the human or animal bo ...

    SBIR Phase II 2011 Department of DefenseOffice for Chemical and Biological Defense
  3. Analysis of New WWVB Modulation Schemes for Future Broadcast

    SBC: XW, LLC dba Xtendwave            Topic: N/A

    This Phase 2 project targets the completion of the development of an improved system for the broadcasting of the WWVB signal, as a direct continuation of the Phase 1 project, which successfully validated the proposed approach through a feasibility study and analyses. Objectives of this project include the design of the new modulation scheme and protocol, the development of a new time-code generato ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  4. An Optical Imaging System to Characterize Mechanical Deformation at Microscopic Length Scale

    SBC: Additive Manufacturing Innovations LLC            Topic: 90

    Additive Manufacturing Innovations LLC (AM-Innov) in collaboration with Clarkson University and Naval Research Laboratory (NRL) proposes a new optical imaging system to characterize microscopic deformation of materials. The system, named as a Mechanical Testing at Microscale system (MT@micro), uses a micro-tensile testing device to mechanically load the specimen uniaxially and an optical imaging p ...

    SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology
  5. Autonomous Data Acquisition and Processing Payload for Small Unmanned Aircraft Systems

    SBC: Kitware, Inc.            Topic: 9501

    In response to NOAA-OAR-OAR TPO-2019-2005899 topic 9.5.01 , Kitware proposes a compact data collection and processing payload that can be hosted from small unmanned aircraft systems to support autonomous beyond line of sight missions. This innovative payload will manage collections from onboard sensors with optimizations collection paradigms. It will produce curated, geo-registered data archives, ...

    SBIR Phase I 2020 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Coral Adhesive

    SBC: Texas Research Institute, Austin, Inc.            Topic: 9201

    Texas Research Institute Austin (TRI Austin) will develop a fast acting, strong, tough, adhesive that will bond underwater without extensive surface preparations. TRI Austin will formulate the adhesive to optimize setup time, establish charge weight for the adhesive to reduce adhesive underwater preparation time, and develop the procedures for using the adhesive to bond coral to reef substrates. A ...

    SBIR Phase I 2020 Department of CommerceNational Oceanic and Atmospheric Administration
  7. 3D Tip Characterization and Surface Reconstruction

    SBC: Nanometrology International, Inc.            Topic: 9070168TT

    Nanometrology International, Inc. (NMI) proposes to demonstrate the feasibility of 3-dimensional (3D) characterization of nanoscale objects using scanning probe microscopy (SPM) with a measurement uncertainty of less than 0.7 nm. To accomplish this task, we propose a novel method of 3D tip characterization and use of an innovative surface reconstruction algorithm recently introduced by NIST and th ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  8. Fluorescent Qdot-Antibody or Aptamer Test Strips for Ultrasensitive Algal Toxin Detection

    SBC: NANOHMICS INC            Topic: 9203

    Nanohmics, Inc. proposes to develop the most sensitive antibody and/or DNA aptamer‐quantum dot (Qdot)‐based lateral flow (LF) test strips possible for detection of harmful algal bloom (HAB) toxins in fresh or saltwater and seafood rinsates. Although commercial colloidal gold‐LF test strips for some HABs and anti‐HAB toxin aptamer DNA sequences already exist, Nanohmics’ innovation of inco ...

    SBIR Phase I 2020 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Multiplex Microsphere Assay for Botulinum Neutralizing Antibodies

    SBC: AGAVE BIOSYSTEMS INC.            Topic: CBD11109

    Currently, the accepted standard experimental model for measuring protective efficacy against botulism is the Mouse Lethality Neutralization (MLN) assay. Botulism poisoning is a life threatening condition that is not only a public health concern, but could also be a potential biological weapon. With seven serotypes of botulinum neurotoxins, there is need for an alternative to the MLN assay due t ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  10. Narrowband Perfect Absorber using Metamaterials

    SBC: Phoebus Optoelectronics LLC            Topic: CBD11102

    We propose a metamaterial-enhanced microbolometer with strong absorption over a narrow band that is dynamically tunable over the 8-10 micron band. A single-layer photonic metamaterial consisting of a thin metal film perforated with a 2-D array of dielectric apertures will be deposited on an amorphous-Silicon layer acting as an absorber and bolometer. The metamaterial, in conjunction with planar di ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government