You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Analysis of New WWVB Modulation Schemes for Future Broadcast

    SBC: XW, LLC dba Xtendwave            Topic: N/A

    This Phase 2 project targets the completion of the development of an improved system for the broadcasting of the WWVB signal, as a direct continuation of the Phase 1 project, which successfully validated the proposed approach through a feasibility study and analyses. Objectives of this project include the design of the new modulation scheme and protocol, the development of a new time-code generato ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  2. Cost Competitive Wave Energy Without Moving Parts

    SBC: Oscilla Power, Inc.            Topic: 815

    Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  3. 3D Tip Characterization and Surface Reconstruction

    SBC: Nanometrology International, Inc.            Topic: 9070168TT

    Nanometrology International, Inc. (NMI) proposes to demonstrate the feasibility of 3-dimensional (3D) characterization of nanoscale objects using scanning probe microscopy (SPM) with a measurement uncertainty of less than 0.7 nm. To accomplish this task, we propose a novel method of 3D tip characterization and use of an innovative surface reconstruction algorithm recently introduced by NIST and th ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  4. Laser Direct Deposition Applied to the Manufacturing of Bulk, Net Shaped Metallic Glasses

    SBC: NANOHMICS INC            Topic: DTRA111003

    Manufacturing of bulk metallic glasses (BMG) requires very rapid cooling and some recent work in laser direct deposition or laser engineered net shaping (LENS) techniques has indicated the possibility of producing net shaped bulk quantities of these materials. To date several groups have had some initial success in forming BMG"s using laser direct deposition suggesting that a careful variation of ...

    SBIR Phase I 2011 Department of DefenseDefense Threat Reduction Agency
  5. Remote Sensing of CWAs Using Smart Polymers and RFID Readout

    SBC: Lynntech Inc.            Topic: DTRA102006

    Military combatants face the threat of unconventional radiological, biological and chemical agents. Sensors that can detect the presence of these warfare modes, particularly chemical warfare agents, are vital to protecting U.S. forces personnel and their assets. Almost all of the currently available devices for chemical warfare agent detection require electrical power, wherein the power source it ...

    SBIR Phase I 2011 Department of DefenseDefense Threat Reduction Agency
  6. Research in Photoconductive Semiconductor Switching (PCSS)

    SBC: Applied Physical Electronics, L.C.            Topic: DTRA102010

    Applied Physical Electronics, LC (APELC) proposes to develop an innovative Silicon Carbide (SiC) Planar Avalanche Switch (PAS) in which a small optical pulse is used to initiate a planar avalanche over a large cross section instead of the filamentary avalanche that is optically initiated in GaAs. The solicitation seeks filamentary avalanche switches based on the large amount of previous work in ...

    SBIR Phase I 2011 Department of DefenseDefense Threat Reduction Agency
  7. Technology Transfer of Multimodal Biometric Application Resource Kit (MBARK)

    SBC: Ad Harmony            Topic: N/A

    The technical objective of this project is to develop a prototype of a face recognition application in a cloud computing environment utilizing MBARK as the middleware. The application will have a client piece that will run on a mobile device such as a laptop and a server piece that will run on a higher-performance computing cluster. The specific objectives of this development project can be enumer ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government