You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Analysis of New WWVB Modulation Schemes for Future Broadcast
SBC: XW, LLC dba Xtendwave Topic: N/AThis Phase 2 project targets the completion of the development of an improved system for the broadcasting of the WWVB signal, as a direct continuation of the Phase 1 project, which successfully validated the proposed approach through a feasibility study and analyses. Objectives of this project include the design of the new modulation scheme and protocol, the development of a new time-code generato ...
SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology -
Cost Competitive Wave Energy Without Moving Parts
SBC: OSCILLA POWER INC Topic: 815Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...
SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration -
Creating a Pragmatic Plan to Deploy and Evolve an LTE Centric Mission Critical Mobile Voice System
SBC: Covia Labs, Inc. Topic: HSB0111003In this Phase I proposal, Covia Labs proposes the development of a plan for a new standardized methodology and application framework to ensure that future 700MHz LTE infrastructure and handsets meet the necessary requirements for mission critical mobile voice. These requirements will be identified during discussions with regional public safety centers established to foster collaboration among the ...
SBIR Phase I 2011 Department of Homeland Security -
Development of a Standard-based Iris Image Quality Tool Suite
SBC: DL2 Tech Corporation Topic: HSB0112005In this project, we will design a standard-based, robust, and efficient iris image quality measure tool. It can be used to select the images of sufficient quality for inclusion in the biometric repository database(s), improve collection processes, and develop quality-based iris matching algorithms. At the same time, it can be incorporated into iris recognition systems as plug-ins to improve recogn ...
SBIR Phase I 2011 Department of Homeland Security -
Dielectric Relaxation Analyzing Probe
SBC: Physical Optics Corporation Topic: HSB0102008To address the HSARPA need for a nonimaging handheld multisensory system for bulk detection of threats and illicit objects hidden on a body of a person, under clothing or in body cavities, Physical Optics Corporation proposes to develop a new Dielectric Relaxation Analyzing Probe. This proposed device is based on Electrochemical Impedance Spectroscopy. The DRAP device will offer detection of both ...
SBIR Phase II 2011 Department of Homeland Security -
3D Tip Characterization and Surface Reconstruction
SBC: Nanometrology International, Inc. Topic: 9070168TTNanometrology International, Inc. (NMI) proposes to demonstrate the feasibility of 3-dimensional (3D) characterization of nanoscale objects using scanning probe microscopy (SPM) with a measurement uncertainty of less than 0.7 nm. To accomplish this task, we propose a novel method of 3D tip characterization and use of an innovative surface reconstruction algorithm recently introduced by NIST and th ...
SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology -
Environmental Chambers for and Integrating Sphere-based Weathering Device
SBC: MEASUREMENT ANALYSIS CORPORATION Topic: 9060173TTUsing a new concept for humidity control, based on a proprietary saturated air source, MAC will develop a design for an environmental chamber for use with NIST’s SPHERE UV source, in weathering or other UV degradation studies. The chamber will interface to the exit port of the SPHERE, maintaining the material coupons, mounted in a standardized sample holder, at a programmed temperature and relat ...
SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology -
Helmet Embedded Conformal Augmented Display
SBC: Physical Optics Corporation Topic: HSB0102006To address the HSARPA need for a next generation helmet with an embedded heads up display for personal situation awareness for emergency responders, Physical Optics Corporation, POC, proposes to continue the development of the Helmet Embedded Conformal Augmented Display, HECAD, system. The HECAD system is based on a modular design that integrates miniature commercial off the shelf microdisplays, o ...
SBIR Phase II 2011 Department of Homeland Security -
HF Radar Calibration with Automatic Identification System Ships of Opportunity
SBC: CODAR OCEAN SENSORS, LTD Topic: 841Over 300 HF RADARs worldwide are producing ocean surface data that is used in oil spill response, search & rescue, vessel traffic management, and research. In the U.S. there are 100+ systems supplying real-time data to the Coast Guard, NOAA IOOS, OR&R and other operational groups. To provide the highest quality data to stakeholders, systems should be calibrated by measuring the receive antenna p ...
SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration -
Interferometric Angle Measurement
SBC: Optical Physics Company Topic: 9060263ROptical Physics Company is proposing to implement an interferometric angle sensor for the purpose of determining the relative angle between the two diffracting crystals. Two approaches can be pursued, namely (1) the dual grating interferometer, and (2) the angle interferometer. The estimated cost of materials for building the angle sensor in quantity ranges between $2K and $12K. The expected accur ...
SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology