You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A FUZZY SET APPROACH FOR SEISMIC SAFETY MARGINS ASSESSMENT.

    SBC: Eda Consultants            Topic: N/A

    THE CONTRACTOR SHALL DEVELOP A FUZZY SET METHODOLOGY FOR UNCERTAINTY ANALYSIS IN PROBABILISTIC SEISMIC SAFETY ASSESSMENT OF NUCLEAR POWER PLANTS. FUZZY SET LOGIC WILL BEUSED FOR COLLECTING, QUANTIFYING AND PROPAGATING SUBJECTIVE,ENGINEERING JUDGEMENT USED IN THE UNCERTAINTY ANALYSIS. IN PHASE I, FEASIBILITY OF THE PROPOSED APPROACH WILL BE DEMONSTRATED BY APPLYING IT TO SELECTED PARTS OF A PROBABI ...

    SBIR Phase I 1987 Nuclear Regulatory Commission
  2. Analysis of New WWVB Modulation Schemes for Future Broadcast

    SBC: XW, LLC dba Xtendwave            Topic: N/A

    This Phase 2 project targets the completion of the development of an improved system for the broadcasting of the WWVB signal, as a direct continuation of the Phase 1 project, which successfully validated the proposed approach through a feasibility study and analyses. Objectives of this project include the design of the new modulation scheme and protocol, the development of a new time-code generato ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  3. A novel enhanced-performance low-cost receiver and modified modulation scheme for WWVB

    SBC: XW, LLC dba Xtendwave            Topic: N/A

    The development of a greatly enhanced receiver for the WWVB signal is targeted, as well as possible modifications in the transmitted signal, which would both offer significant improvements in its effective coverage. This is to be achieved while allowing the replacement of the bulky, expensive, ferrite-based antenna, commonly used in the receiver, with a novel lower-cost antenna. Furthermore, the p ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  4. Credential Management

    SBC: ECleide (VKD Shoppe, Inc.)            Topic: N/A

    The ability to electronically identify users and their devices is increasingly becoming an integral part of our interaction with computing platforms. Whether an operating system is contacting the manufacturer's web site to confirm its proper registration and payment today, or a cell phone is broadcasting entrance credentials to a secure physical site tomorrow, it is apparent that identifying infor ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  5. DEVELOP AN INHALATION SCREENING DOSE MONITOR FOR WORKERS AT NUCLEAR POWER PLANTS

    SBC: Mikayola International            Topic: N/A

    AN "INHALATION SCREENING DOSE COLLAR-STANCHION MONITOR" WITHEMBEDDED MINIATURE THIN-WALL GEIGER-MUELLER RADIATION DETECTORS EVALUATES THE THYROID GLAND FOR NANOCURIE ACTIVITYINVENTORY. THE PRIMARY TECHNICAL OBJECTIVE IS TO ESTABLISH THAT THE "COLLAR-STANCHION MONITOR" WILL BE CAPABLE OF DETECTING WITHIN 15 SECONDS AND WITH 2 SIGMA CONFIDENCE AN ACTIVITY INVENTORY OF 0.7 NANOCURIES OF I-131 DOSE EQ ...

    SBIR Phase I 1987 Nuclear Regulatory Commission
  6. Development of a Laboratory Scale CD-SAXS Device for Semiconductor Metrology Applications

    SBC: Jordan Valley Semiconductors, Inc.            Topic: N/A

    A semiconductor metrology tool will be developed employing the technique of small-angle x-ray scattering (SAXS) to measure the critical dimension (CD) of patterned device structures. The feasibility of the SAXS technique to measure CD has been shown using high-power synchrotron radiation facilities which are not of practical use to the semiconductor industry. The ultimate project goal is to produc ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  7. Distributed MBARK Based Mobile Face Recognition

    SBC: Ad Harmony            Topic: N/A

    Perform a feasibility study on developing a face recognition application in a cloud computing environment utilizing MBARK as the middleware. The application will have a client piece that will run on a mobile device and a server piece that will run on a higher-performance computing cluster. The specific objectives of the feasibility can be enumerated as follows: 1. Split/distribute the MBARK middle ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  8. 3D Tip Characterization and Surface Reconstruction

    SBC: Nanometrology International, Inc.            Topic: 9070168TT

    Nanometrology International, Inc. (NMI) proposes to demonstrate the feasibility of 3-dimensional (3D) characterization of nanoscale objects using scanning probe microscopy (SPM) with a measurement uncertainty of less than 0.7 nm. To accomplish this task, we propose a novel method of 3D tip characterization and use of an innovative surface reconstruction algorithm recently introduced by NIST and th ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  9. Dual-Probe CD-AFM Calibration

    SBC: XIDEX CORPORATION            Topic: N/A

    Xidex proposes to demonstrate the feasibility of calibrating a critical-dimension atomic force microscope (CD-AFM) without the use of a reference artifact in such a way that high-precision critical dimensions can be generated independently of changes in probe tip shape. We plan to demonstrate sub-nanometer repeatability for tip-to-tip calibration, and demonstrate single-point critical-dimension me ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  10. Next-generation Simulation Suite for Advanced Optical Metrology

    SBC: RSOFT DESIGN GROUP            Topic: N/A

    This proposal is aimed at developing a full software solution for the next generation advanced optical metrology. Existing simulation tools cannot meet the current and future needs of scattering-based optical metrology for semiconductor manufacturing. Our proposed work will first focus on developing an enhanced RCWA-based simulation engine with advanced algorithms for fast convergence and stabilit ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government