Award Data

International Electronic Machines (IEM) Corp. will develop the Intelligent Dimension Evaluation and Alerting System, or IDEAS.  In Phase I, IEM will examine two different approaches for achieving the goal of accurate, reliable dimensioning and classification of moving vehicles at highway speeds.  IDEAS will leverage prior work by IEM for the Federal Railroad Administration (FRA), New York State

TRI proposes to develop reliable methodology and protocols for in-service inspection,recertifying and retiring DOT COPVs to maximize service life while ensuring personnel safety. This method must be sufficiently robust to prevent in-service failures, while being straightforward and affordable enough to be conducted at cylinder recertification facilities. To accomplish this with a high degree of co ...

A nondestructive tool will be developed to quatitatively assess residual stress in pipelines from the exterior and through coatings. Residual stress is a critical factor that determines the cracking susceptibility of pipeline steels, but existing methods for measuring mechanical damage in pipeline steels are incapable of quantifying the residual stress levels. A larger gouge or dent does not nec ...

During Phase I, IEM developed a proof of concept for a Smart Grade Crossing Monitor (SGCM) using multispectral imaging technology for enhanced monitoring of highway rail grade crossings to improve safety by providing warnings of significant objects present in the crossing. The Phase I work conclusively demonstrated that multispectral imaging is clearly superior to visible or infrared spectrum imag ...

Nanometrology International, Inc. (NMI) proposes to demonstrate the feasibility of 3-dimensional (3D) characterization of nanoscale objects using scanning probe microscopy (SPM) with a measurement uncertainty of less than 0.7 nm. To accomplish this task, we propose a novel method of 3D tip characterization and use of an innovative surface reconstruction algorithm recently introduced by NIST and th ...

The technical objective of this project is to develop a prototype of a face recognition application in a cloud computing environment utilizing MBARK as the middleware. The application will have a client piece that will run on a mobile device such as a laptop and a server piece that will run on a higher-performance computing cluster. The specific objectives of this development project can be enumer ...

This Phase 2 project targets the completion of the development of an improved system for the broadcasting of the WWVB signal, as a direct continuation of the Phase 1 project, which successfully validated the proposed approach through a feasibility study and analyses. Objectives of this project include the design of the new modulation scheme and protocol, the development of a new time-code generato ...