You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE
SBC: 3F LLC Topic: AF06020Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.
SBIR Phase I 2006 Department of DefenseAir Force -
Low-Output High Precision Automated Powder Disseminator
SBC: ADVANCED MECHANICAL SYSTEMS TECHNOLOGY, Topic: CBD06101This proposal presents a Phase I SBIR project to develop a high precision, low disperse rate powder disseminator for the US Army. In the development of the sensitive detecting agent, we need to release a precise amount of C&B agents in the controlled detection experiments. However, such a technology does not exist at the present time. After examining existing technologies, we believe that the r ...
SBIR Phase I 2006 Department of DefenseOffice for Chemical and Biological Defense -
Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems
SBC: 3TEX, Inc. Topic: AF04249In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...
SBIR Phase II 2006 Department of DefenseAir Force -
Integrally 3D Woven/3D Braided Composite Joining Elements For Ship Construction
SBC: 3TEX, Inc. Topic: N04093During Phase I, 3TEX designed universal, one-piece, 3D woven fiber preforms which can be used as either a “Butt” (H) joint or as a “P” joint as needed. Composite joints were fabricated and tested, demonstrating the benefit of the integral nature of the 3D preforms. 3D stress/strain and crack propagation analysis of composite Π-joint was performed using 3D MOSAIC code. 3D displacement, st ...
SBIR Phase II 2006 Department of DefenseNavy -
Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites
SBC: 3TEX, Inc. Topic: AF05248Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...
SBIR Phase II 2006 Department of DefenseAir Force -
Improved Miller Fasteners Based on 3-D Braided Preforms
SBC: 3TEX, Inc. Topic: N06033Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...
SBIR Phase I 2006 Department of DefenseNavy -
Ambient Power Supply for On-Board Vehicle Health Monitoring MEMS Sensors
SBC: AMBIENT MICRO Topic: AF06170To support its use of MEMS sensors for vehicle health monitoring, the Air Force seeks to couple the harvesting of ambient energy sources with a micro energy storage device. Microbatteries have demonstrated their viability as a high density power source, but their short operating life limits their usefulness. To extend the operating life of microbatteries, ambient energy sources can be used to co ...
SBIR Phase I 2006 Department of DefenseAir Force -
Novel Protein Nanodelivery Systems for Biological Agent Countermeasures
SBC: ANP TECHNOLOGIES INC. Topic: A04192We propose to continue the development and characterization of a polymeric nanoencapsulation technology that can increase the lifetime of a protein therapeutic agent within a biological system. The materials have been demonstrated to exhibit no cytotoxicity and to efficiently deliver antibody against Protective Antigen of bacillus anthracis.
SBIR Phase II 2006 Department of DefenseArmy -
Rapid Detection of Acetylcholinesterase-Inhibiting Pesticides in Water Using a Handheld Assay and Reader
SBC: ANP TECHNOLOGIES INC. Topic: A06159We propose that a comparative colorimetric assay be developed that will use a ticket of the same dimensions as the current ANP immunoassay tickets. This will allow the AChE test to be conducted using a similar workflow as the lateral flow immunoassay-based HHAs and be similarly read on the ANP reader to yield an unambiguous result independent of user judgment.
SBIR Phase I 2006 Department of DefenseArmy -
High Sensitivity Rugged Array Detectors for Field Deployed Instruments: Low-Light Level Camera for Laser-Induced Breakdown Spectroscopy (LIBS) and Ram
SBC: B & W TEK INC Topic: A06065Low-light-level photodetector arrays are proposed for detecting the weak optical emission spectra from the trace atoms in the laser-induced breakdown spectroscopy (LIBS). The proposed semiconductor image intensifier and low-light-level camera utilize the miniaturized and monolithically integrated version of a proven solid-state detector technology, and is expected to be able to detect femto-watts ...
SBIR Phase I 2006 Department of DefenseArmy