You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Interline CCD for Low light Imagery

    SBC: Fairchild Imaging            Topic: A04116

    There is a need to complement the current Gen III image intensifier imaging system with a solid-state low light level camera that is better optimized for remote viewing applications. A silicon-based solution is an ideal candidate for low light imaging because of its high quantum efficiency, low dark current, and excellent uniformity. However, to meet performance requirements under overcast starl ...

    SBIR Phase II 2006 Department of DefenseArmy
  2. Spectrally Tailored High Efficiency Long Wave Pumps for Eye-Safe Solid-State Lasers

    SBC: QUINTESSENCE PHOTONICS CORP.            Topic: A04049

    We will deveop high power, high efficiency pump diode arrays operating at 1532 nm for pumping eye-safe lasers. These arrays incorporate frequency selective elements to narrow the spectrum and optimize absorption, and have special epitaxial designs that maintain high efficiency at high temperatures and output powers.

    SBIR Phase II 2006 Department of DefenseArmy
  3. Image Intensifier Compatible Thermal Imaging System

    SBC: Irvine Sensors Corporation            Topic: A05068

    The primary objective of the overall project is to develop a system that incorporates our extremely lightweight, low power, small size thermal imaging camera into legacy NVG’s without having to modify the NVG. A secondary objective is to maintain the performance of our thermal imaging camera, which by far exceeds the Army threshold for thermal imaging performance requirements, while keep the co ...

    SBIR Phase II 2006 Department of DefenseArmy
  4. VEIL (Vulnerability-reducing Engineered Infrared-obscurant Load)

    SBC: Oceanit Laboratories, Inc.            Topic: A13044

    Oceanit proposes to scale-up processes for low cost obscurant materials. These processes include the development , fabrication, and testing of materials and coatings.

    SBIR Phase II 2017 Department of DefenseArmy
  5. Dynamic Hybrid Rope Monitoring System

    SBC: Physical Optics Corporation            Topic: A14056

    In this sequential Phase II effort, Physical Optics Corporation (POC) proposes to develop and test a new Dynamic Hybrid Rope Monitoring (DHRM) system to measure dynamic strain and forces on individual helicopter sling legs and parachute suspension lines. It is based on novel construction of hybrid rope using a small percentage of core-conducting bicomponent synthetic fiber yarns mixed with bulk, n ...

    SBIR Phase II 2017 Department of DefenseArmy
  6. Adaptive-Zoom Weapon Scope with Integral Ranging, Tracking and Fire Control

    SBC: VOXTEL, INC.            Topic: A15095

    A compact, lightweight, direct-view variable-magnification fire-control riflescope with integral programmable aiming system will be developed, which includes: a 1550-nm eyesafe laser rangefinder (LRF), 9-axis inertial measurement unit with integrated environmental sensors and ballistic computer, and a real-time direct-view heads-up display (HUD) disturbed reticle. The proposed system will be demon ...

    SBIR Phase II 2017 Department of DefenseArmy
  7. Digital Readout Integrated Circuits With Efficient, Low Power On-chip Data Compression Development

    SBC: NU TREK INC            Topic: A16040

    In Phase I Nu-Trek demonstrated the feasibility of the Orchid readout integrated circuit (ROIC), which offers multiple on-chip data compression options, dual band operation, a large format, a high frame rate, and very low power consumption. Underlying the game changing performance is Nu-Trek’s Mixed Mode architecture, which supports multiple data compression options and consumes less than ¼ the ...

    SBIR Phase II 2017 Department of DefenseArmy
  8. Modeling of concrete failure under blast and fragment loading

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC            Topic: A10106

    The objective of this project is to develop a concrete 3D printing virtual simulator within the Modeling and Analysis for the Response of Structures (MARS) software. MARS is a multipurpose software featuring multiphysics and multiscale algorithms. MARS includes the Lattice Discrete Particle Model (LDPM) for the simulation of concrete under dynamic, quasi-static, and long term loading conditions. T ...

    SBIR Phase II 2017 Department of DefenseArmy
  9. Improved Coupling Factor of Personal Cooling Systems

    SBC: Oceanit Laboratories, Inc.            Topic: OSD11H06

    Oceanit proposes to continue to improve the efficiency of the its existing Liquid Cooled Garment for us by personnel wearing chemical/biological protective clothing.

    SBIR Phase II 2017 Department of DefenseArmy
  10. Post-IED Hull Inspection Tool

    SBC: Corvid Technologies LLC            Topic: N123156

    Based on lessons learned through the past two decades of experience on the battlefield, the Army and Marine Corps need a data-driven, reliable way to analyze and interpret vehicle damage due to improvised explosive devices (IED). Such a tool will minimize guesswork on the front lines that can result in a significant safety risk to vehicle operators if damage is not identified and repaired. The Bla ...

    SBIR Phase II 2017 Department of DefenseArmy
US Flag An Official Website of the United States Government