Award Data

The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

The Bottom Feeder project is designed to prove out the research done in Phase I using a prototype platform. The prototype will be a full size version of the platform designed during Phase I. The Phase I platform was designed to work in two operational configurations, a highly efficient mode and a highly maneuverable mode, with the ability to switch between them while submerged. The platform is equ ...

To satisfy the need for a radiation-hardened, 1064-nm laser sensitive, single-photon sensitive ladar camera, with pixel counts of 128 x 128 or more, a proven single-photon linear-mode InGaAs(P)/InAlAs avalanche-photodiode (APD) detector will be integrated with low-noise ladar readout integrated circuits (ROICs), and its performance will be shown compatible with missile defense mission requirements ...

The Missile Defense Agency (MDA) is in need of an innovative air launch pallet aimed at decreasing launch cost per mission and improving capability to accommodate various shape and size airdropped vehicle configurations. By developing a recoverable and reusable platform, MDA’s airdrop programs become more economically viable and environmentally friendly. To achieve MDA’s goals and still meet p ...

Vadum has demonstrated the Optimal Advanced Hypervelocity Projectile (HVP) Trajectory System (OATHS) which increases the performance of the HVP by optimizing HVP trajectory to its target. OATHS was prototyped and tested using an in-house MATLAB-based combat system development environment. The results of Phase I testing show that OATHS can feasibly increase HVP probability of kill or reduce the tot ...

In this PhaseII SBIR effort, Corvid Technologies completes the development of an innovative approach for solving Unstructured Fixed Grid Navier-Stokes CFD flow simulations. The proposed approach developed at Corvid is referred to as the Virtual Geometry Insertion (VGI) technique. This approach allows for the virtual insertion of arbitrary geometric components into a standard CFD analysis. This g ...

The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

Improving efficiency and reliability of GaN-based FETs is paramount in enabling system insertion, both of which are limited by thermal effects and self heating in the devices. One factor limiting high voltage and high efficiency operation of GaN HEMTs is leakage current between the gate and drain at high drain bias. Pure screw dislocations arising from the lattice mismatch at the SiC substrate and ...

Large area semi-insulating GaN has the potential to impact the commercialization of many technologies such as power transistors, high frequency microwave amplifiers, and high-speed, high-power switching components. One of the limiting factors in many of these applications is the lack of commercially available large diameter substrates. This program will develop 4" diameter semi-insulating GaN su ...

We propose Ranger ES, a low cost, autonomous underwater vehicle (AUV) for three-dimensional profiling and water samplings of chemical, physical, and biological parameters of oceanic and fresh waters. The AUV will be programmable by point and click to analyze a volume of water continuously for the selected parameters. After returning for pickup after a day¿s run, it will download its data into a ...