List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Flexible and Efficient Cooling System

    SBC: BASCOM HUNTER TECHNOLOGIES, INC.            Topic: N18AT001

    The objective of this program is to develop and demonstrate a flexible and efficient cooling system (FECS) for helicopters and other aircraft. FECS can be used to cool lasers, electronics or other devices in slow or fast-moving aircraft that are operating in high ambient temperatures. It utilizes a modular approach that allows FECS to be quickly and easily modified for various payloads. There are ...

    STTR Phase I 2018 Department of DefenseNavy
  2. Cooling/Thermal Management System Development for Active Denial Technology (ADT) and High-Power Radio-Frequency vehicle Stopper (RF) Systems

    SBC: International Mezzo Technologies, Inc.            Topic: N102110

    The heat exchanger in the Nacelle of the V-22 Osprey cools gearbox oils and hydraulic oil. In operation, the current heat exchanger becomes clogged with sand and dust and the engine overheats. Also, the current unit is very difficult to clean. A micro tube heat exchanger with large air passages offers the potential to alleviate this problem. In this program, Mezzo will design and manufacture, and ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Enhanced Cell Designs for Improved Internal Heat Transfer for High Rate and Power Capable, Large-Format Batteries

    SBC: K2 ENERGY SOLUTIONS, INC.            Topic: N151073

    A high energy density, high power cylindrical cell suitable for pulsed power operation with a capacity between 15 and 20 Ah will be developed. The cell will utilize a lithium iron phosphate chemistry and will utilize both internal and external thermal management technology to minimize temperature rise even under high power operation.

    SBIR Phase II 2017 Department of DefenseNavy
  4. Adaptive Energy Absorbing Buffer for Reduced Wave Slam Energy

    SBC: Advanced Materials and Devices            Topic: N17AT014

    This Small Business Technology Transfer (STTR) Phase I effort will demonstrate the feasibility of a novel passively adaptive shock and vibration isolating buffer system for the US Navys combatant craft. The proposed approach does not rely on conventional passive, semi-active or active spring-damper systems. The buffer system will provide energy damping via a liquid spring buffer and eddy current d ...

    STTR Phase I 2017 Department of DefenseNavy
  5. Energy Efficient and Low Latency Photonic Signal Processing using Excitable Lasers with Compressive Sampling

    SBC: BASCOM HUNTER TECHNOLOGIES, INC.            Topic: N17AT027

    This program proposes to develop a photonic integrated circuit with compressive sampling using excitable lasers and neural network process. Compressive sampling overcomes the limitation of traditional approach to analog-to-digital conversion, and provides 2 to 10 folds of energy reduction and has low latency. Using excitable laser is an innovative approach that is fundamental to provide the simple ...

    STTR Phase I 2017 Department of DefenseNavy
  6. Reduced Cost, Repeatable, Improved Property Washout Tooling for Composite Fabrication

    SBC: Nevada Composites, Inc.            Topic: N16AT015

    Nevada Composites has developed Green-Aero(sm) toolinglightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to 370C (700F). Tools, whether single-sided or washout, have a composite-compatible CTE, provide tight tolerances, are reproducible, are stable to storage under ambient conditions, and are of affordable cost. ...

    STTR Phase II 2017 Department of DefenseNavy
  7. Reduced Cost, Repeatable, Improved Property Washout Tooling for Composite Fabrication

    SBC: Nevada Composites, Inc.            Topic: N16AT015

    Nevada Composites has developed Green-Aero(sm) toolinglightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to 370C (700F). Tools, whether single-sided or washout, have a composite-compatible CTE, provide tight tolerances, are reproducible, are stable to storage under ambient conditions, and are of affordable cost. ...

    STTR Phase I 2016 Department of DefenseNavy
  8. Modular Boat Ramp to Launch and Retrieve Watercraft from Joint High Speed Vessel (JHSV)

    SBC: TECHNOLOGY ASSOCIATES, INC.            Topic: N152102

    Technology Associates, Inc. (TAI) proposal is for development of a TAI modular boat ramp concept (TAI-MBR) for Launch and Recovery (L&R) of watercraft from the Joint High Speed Vessel's (JHSV) stern. The TAI-MBR will rapidly L&R various manned and unmanned watercraft in less than 15 minutes and in sea state 3 (SS3) with wave heights of 3 to 5 ft. It will not rely on the use of the cargo crane for ...

    SBIR Phase I 2016 Department of DefenseNavy
  9. Development of a Total Residual Oxidant Sensor Development of a Total Residual Oxidant Sensor

    SBC: HALOGEN SYSTEMS, INC.            Topic: N092152

    Recent efforts at improving shipboard operations have focused on desalination systems. One area in which manpower may be significantly reduced is in the monitoring chlorine residuals from hypochlorite enhanced streams that are used for periodic biofouling control flushes of microfiltration membranes. These are used for pretreatment of seawater prior to exposure to reverse osmosis membranes used fo ...

    SBIR Phase II 2016 Department of DefenseNavy
  10. Controllable and Adaptable Lateral Support System

    SBC: Advanced Materials and Devices            Topic: N132143

    This SBIR Phase II effort will be aimed towards designing and testing a controllable missile lateral support system (LSS) that reacts automatically to shock and vibration inputs. A sub-scale lateral support system (LSS) assembly consisting of six jacking feet and a full-scale LSS jacking feet unit will be fabricated and tested. The electromechanically actuated LSS will offer controllable damping t ...

    SBIR Phase II 2015 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government