You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Low-Cost, Modular Blast Acquisition Test System

    SBC: ADVANCED MATERIALS & DEVICES            Topic: DHA22B001

    This Small Business Technology Transfer Phase II effort aims to develop a fully integrated, modular human surrogate, a software suite, and wireless data transmission.  The main goals of the Phase II project will be to increase the biofidelity, modularity, and manufacturability of the low-cost, sensor-integrated surrogate developed in Phase I.  In Phase II, the prototype that was developed in Pha ...

    STTR Phase II 2023 Department of DefenseDefense Health Agency
  2. At-Home Minimally Invasive Tacrolimus Plasma Level Monitoring Device

    SBC: REAL-TIME ANALYZERS INC            Topic: A18145

    The overall goal of this proposed project (through Phase III) is to develop the Tacrolimus At-home Saliva Test (TAST) to measure tacrolimus at ng/mL levels in oral fluid (saliva) at-home in 15-20 minutes.  The TAST will replace the painful blood tests currently performed at hospital and clinics that military patients, who have limb, facial and organ transplants, must undergo to avoid transplant r ...

    SBIR Phase II 2023 Department of DefenseDefense Health Agency
  3. Artificial Intelligence Driven Voice Control at the Edge (ADViCE)

    SBC: PRIMORDIAL LABS INC.            Topic: SOCOM224D005

    For forward/deployed SOF in today’s tactical environment, operating a drone to achieve ISR objectives, including platform and sensor control, means at best experiencing major cognitive overload and at worst being out of the fight. In recognition of this problem, SOCOM224/D005 (Artificial Intelligence/Drive Voice Control at the Edge (“ADViCE”)) seeks to “develop applied research toward an i ...

    SBIR Phase II 2023 Department of DefenseSpecial Operations Command
  4. Real-Time Thickness Measurement Technology for Process Control of Coating Manufacturing

    SBC: SOLUTION SPRAY TECHNOLOGIES LLC            Topic: 2

    Highly engineered ceramic coatings, called thermal barrier coatings (TBCs), have been used for many years in the gas turbine industry, and more recently, in internal combustion engines for automotive, truck, and construction vehicle applications. These coatings increase the performance and durability of the engines. The gas turbine industry has shown that coating thickness variations are major sou ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  5. Cyber-Physical Trust Anchors with Definable Costs and Security

    SBC: REFINED IMAGING, LLC            Topic: 3

    A cyber-physical trust anchor is an essential component of a secure additive manufacturing supply chain. Customer discussions show a strong need for low-cost trust anchors as well as high-security, more costly trust anchors. The concept underlying our trust anchor enables implementations that can be described as good, better, best. The two physical-digital components are first embedded digital cod ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  6. A Low-Cost, Modular Blast Acquisition Test System

    SBC: ADVANCED MATERIALS & DEVICES            Topic: DHA22B001

    This Small Business Technology Transfer Phase I effort aims at the feasibility of developing a low-cost, modular human surrogate including a sensory system and organ models with integrated pressure sensors.  The proposed system will be utilized for evaluating personal protective equipment (PPE).  Current human surrogates are either costly or do not provide adequate pressure measurements. The pr ...

    STTR Phase I 2022 Department of DefenseDefense Health Agency
  7. Multi-Mode Exoskeleton Boot to Facilitate Rehabilitation and Return to Service

    SBC: RESULTS GROUP, LLC            Topic: DHA224D003

    More than half of military service members sustain a musculoskeletal injury each year, and the majority of those are attributed to the lower limb, leading to millions of days of limited duty annually and reduced overall readiness.  To establish a leadership role, a solution will help strengthen holistic continuity of care across the phases of lower limb rehabilitation and enhance prevention, whil ...

    SBIR Phase II 2022 Department of DefenseDefense Health Agency
  8. A Wearable Underwater Blast Sensor

    SBC: ADVANCED MATERIALS & DEVICES            Topic: DHA17C002

    The goal of the proposed Small Business Technology Transfer (STTR) Sequential Phase II project is to further develop a wearable, three-dimensional (3-D) underwater explosion (UNDEX) blast exposure monitoring system.  To date, there are no wearable blast sensors available to correlate UNDEX blast exposure data to diver injuries.  The uniqueness of the proposed 3-D OmniBlast Water (OBW) sensor is ...

    STTR Phase II 2022 Department of DefenseDefense Health Agency
  9. Nanostructure Array Integrated Medical Mask Design with High Filtration, Low Breathing Resistance, and Antimicrobial Performances

    SBC: 3D ARRAY TECHNOLOGY LLC            Topic: 2

    Herein, 3D Array Technology LLC aims to develop a new type of nanostructure array (nanoarray) integrated microfibers to enable the medical masks with high filtration efficiency, low breathing resistance, and good antimicrobial capabilities. By integrating multifunctional nanoarray coatings onto the polypropylene microfibers through a scalable hydrothermal process, the surface area and roughness of ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  10. A Wearable Blast Wave Sensing System for In-Air and Underwater Explosions

    SBC: ADVANCED MATERIALS & DEVICES            Topic: DHA17C002

    Advanced Materials and Devices, Inc. (AMAD), in a 12-month TRL Booster Pilot effort, will move the development and manufacturing of a wearable, wireless, in-air and underwater sensor from TRL 5-6 to a TRL of 6-7. At the end of the TRL Booster Pilot effort, the wearable sensor will be ready for qualification testing and manufacturing via Phase III funding. At the end of the current Phase II effort ...

    STTR Phase II 2021 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government