List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. ATCOM SHARP Box for Real-Time Turbulence Mitigation

    SBC: EM PHOTONICS INC            Topic: NASAA402

    When imaging over long distances, atmospheric turbulence between the camera and subject degrades the collected data limiting the effective resolution, regardless of the quality of the optic and sensor used. This reduction in image quality can have serious impacts on the ability to carry out missions by reducing situational awareness and preventing target identification. EM Photonics has been worki ...

    SBIR Phase II 2017 Department of DefenseSpecial Operations Command
  2. Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: N/A

    Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  3. Anion Exchange Resins for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: 9060663R

    Single chirality of single-walled carbon nanotubes (SWCNTs) is critical for their superb mechanical, thermal, optical and electronic properties. All known methods for producing nanotubes give mixtures of tubes with different chiralities. Physical separation of SWCNT by chirality is thus an enabling step for many potential applications and fundamental studies. The existing anion exchange resins are ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  4. Development and Manufacturing of Lightweight Textile Fire Barrier for Furniture and Mattresses

    SBC: Tex Tech Industries Inc.            Topic: N/A

    Through this NIST SBIR program, Tex Tech Industries is developing furniture and mattress fire blocking materials. Fire barrier methods are necessary to protect furniture and mattresses from fire. In Phase I, Tex Tech used a variety of fibers to make and evaluate fibers for fire barriers. In Phase II, Tex Tech proposed to continue to develop a fire protection barrier from textiles that can potentia ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  5. Development and Manufacturing of Lightweight Textile Fire Barrier for Furniture and Mattresses

    SBC: Tex Tech Industries Inc.            Topic: N/A

    New fire barrier methods are necessary to protect furniture and mattresses from fire. Current California (and soon National) regulations require mattresses to be able to pass the mattress fire burn test. Typical barrier fabrics use self extinguishing fibers with high limiting oxygen index (LOI) to create a barrier that the flame cannot pass. A second approach creates a carbon barrier that is forme ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  6. Lightweight, Compact Atmospheric Gas Sensor

    SBC: Sensor Research And Development Corporation            Topic: SOCOM08005

    SRD will develop a miniaturized atmospheric gas sensor array and design a gas analyzer (sensor analyzer module, SAM) capable of accurately detecting and autonomously monitoring critical atmospheric gases in enclosed spaces. In this Phase I effort, SRD will use its current, existing technology (miniaturized sensor platform, proprietary SMO sensor coatings and advanced signal processing algorithms) ...

    SBIR Phase I 2008 Department of DefenseSpecial Operations Command
  7. Individual Cooling Equipment

    SBC: R*BAT, INC.            Topic: SOCOM06009

    Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  8. Extreme Environment Hand-Wear system

    SBC: Kreamer Sports, Inc.            Topic: N/A

    "Our Phase I study proved the feasibility of using monofilament carbon tow and thin resistant wire in a glove system to provide an adequate heat source to keep a soldier's hands comfortable in extreme cold temperatures while retaining hand dexterity andtactility. Our objectives during Phase II are to (1) incorporate our heat generation process into a super thin, non-melting, flame-rerardant materi ...

    SBIR Phase II 2002 Department of DefenseSpecial Operations Command
  9. Application of Turbine Engines in Naval Special Warfare (NSW) Craft

    SBC: MARINE TURBINE TECHNOLOGIES, LLC            Topic: N/A

    The objective is to modify and test gas turbine engines presently installed in/on marine craft to demonstrate that by adapting technology used on street legal vehicles can be used to reduce the heat and noise levels in marine craft. Whether or not the IR15dB level or lower, and the above water acoustic/noise level to 60dB level or lower can be achieved, is a matter that can only be demostrated by ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  10. SOF Tactical Information Assistant

    SBC: Technology International Incorporated of Virginia            Topic: N/A

    This Phase I SBIR Project will involve performance of a study to evaluate current commercial display technologies, head-mounted and wrist-mounted display configurations, and software that could fulfill the SOF requirements. The study will emphasizeidentification of the best display at the lowest power consumption. Based on the evaluation of current practice, innovative technology ideas will be pre ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government