Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Large Soft X-Ray Fluorescence Detector

    SBC: Detector Technology, Inc.            Topic: N/A

    Detector Technology will develop and manufacture a 10cm2 large format cone. The cone will be based on a ceramic substrate then coated with glass frit. The cone will then be attached to a standard single channel multiplier. Detector Technology will also investigate different low work function coatings to improve the first strike statistic of fluorescence. Simultaneous research in conjunction with s ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  2. High-Resolution, Two-Dimensional Neutron Imaging Detector

    SBC: NOVA SCIENTIFIC INCORPORATED            Topic: N/A

    Nova Scientific proposes a high-resolution neutron imaging detector having a specialized neutron-sensitive electron amplified detection stage integrated with a cross-strip electronic readout capable of centroid averaging. This detector system will have direct application to two-dimensional imaging of hydrogen fuel cells and support the diagnostic capabilities of the Neutron Imaging Facility (NIF) ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  3. A Coded Alternating Micromachined Retroreflector Array (CAMERA)

    SBC: RESEARCH SUPPORT INSTRUMENTS, INC.            Topic: N/A

    RSI will develop a technology to improve fire fighter visibility and enable tracking of position/identity. The Coded Alternating Micromachined Retroreflector Array (CAMERA) will use RSI's microscale retroreflectors, a near-infrared (IR) coating and near-IR sources pulsing on alternating video frames to encode fire fighter identities, and a near-IR video camera. These grain-of-sand-sized markers wo ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  4. Low-Cost Microcalorimeter Spectrometer for X-Ray Macroanalysis

    SBC: STAR CRYOELECTRONICS LLC            Topic: N/A

    A low-cost superconducting transition edge sensor (TES) microcalorimeter spectrometer is described for high energy and high spatial resolution X-ray energy dispersive spectroscopy and microanalysis. The proposed microcalorimeter instrument offers an energy resolution that is comparable to and potentially even better than wavelength dispersive spectrometers, thereby enabling the resolution of inter ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  5. A Non-Contact Sensor for Advanced Warning of Structural Collapse

    SBC: Summit Safety, Inc            Topic: N/A

    Summit Safety will develop an ultrasonic, non-contact sensor and system capable of detecting small displacements of structure - such as roof sagging and structural bending - and the acoustic sounds and fire-induced vibrations of structures that are precursors of structural collapse. The system will provide advanced warning to the Incident Commander of potential or imminent structure collapse. In P ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  6. Renewable Electric Energy Source for Special Operations Force (SOF) Maritime Combatant Craft

    SBC: Aerodyne Research, Inc.            Topic: SOCOM05001

    An electric power source is needed that is two-man portable or lighter, operates on logistics fuels (JP-8, diesel), is quiet, and has a low thermal signature. We propose the MICE (Miniature Internal Combustion Engine) generator that is currently being developed by Aerodyne Research to deliver 500 W electrical power using logistics fuels. The design for this MICE generator will weigh less than 16 ...

    SBIR Phase I 2005 Department of DefenseSpecial Operations Command
  7. Directed Energy Tactical Mission Analysis Code

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: SOCOM03007

    The Directed Energy Tactical Mission Application Code (DETMAC) is a mission planning simulation tool to model directed-energy weapon capabilities, target vulnerabilities, and environmental constraints. It will be used by mission planners to visualize an entire mission timeline and prompt development of optimal tactics, techniques and procedures for successful employment of new weapon capabilities ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  8. Fuel Cell Quiet Auxiliary Power Unit for Special Ops

    SBC: PROTONEX TECHNOLOGY CORP.            Topic: SOCOM05001

    Protonex will develop a quiet, durable, high-energy source which is able to power auxiliary electrical equipment for SOCOM operations. It must be able to withstand a harsh operational environment and be lightweight, compact and man portable. Protonex proposes to develop a quiet Auxiliary Power Unit (APU) that will meet all the energy, power and other requirements for this application. This syst ...

    SBIR Phase I 2005 Department of DefenseSpecial Operations Command
  9. SBIR Phase II: Advanced Phased Array Ultrasound Instrument for Nondestructive Evaluation (NDE)

    SBC: ACOUSTIC IDEAS, INC.            Topic: N/A

    This SBIR Phase II research project strives to develop an Advanced Ultrasonic Beamformer that is unparalleled in its scalability and signal processing features. The ultrasonic beamformer architecture will be unique in its breadth of features. The architecture was developed as the superset of features across several fields including medical imaging, medical therapy, bone density measurement, vascul ...

    SBIR Phase II 2005 National Science Foundation
  10. STTR Phase I: E-Beam Automated Tape Placement Technology for High Temperature Composites

    SBC: Adherent Technologies, Inc.            Topic: MI

    This Small Business Technology Transfer Phase I project focuses on the development of high temperature resins and tapes and their use in automated tape placement (ATP) fabrication with in-situ electron beam cure. Thermoplastic polymer matrix ATP and layer-by-layer electron beam curing ATP (EB-ATP) have been identified as among the most promising techniques for achieving autoclave properties in AT ...

    STTR Phase I 2005 National Science Foundation
US Flag An Official Website of the United States Government