Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Real-time Ladar Scene Rendering and Projection Component Technologies

    SBC: AEGIS TECHNOLOGIES GROUP, INC., THE            Topic: MDA05049

    The objective of this Phase I SBIR proposal is to show the feasibility of integrating the key optical and electronic components of a multichannel laser modulator into a single multichip module (MCM). The module concept developed under this effort will consist of at least eight parallel channels capable of independently producing an analog amplitude modulated optical waveform. Integration will incl ...

    SBIR Phase I 2006 Department of DefenseMissile Defense Agency
  3. Technologies to Improve Software Acquisition/Development Process

    SBC: Analytical Services, Inc.            Topic: MDA04034

    The Missile Defense Agency (MDA) does not currently have an automated, centralized database to store Rad-Hardening (Rad-Hard) vendor data and corresponding test results. Portions of this data are currently stored in a spreadsheet, without consistency, distributed access, robust data search, filtering, or reporting capabilities. These data are not readily available to the developers of mission-crit ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  4. Automated Feature Extraction Capabilities for the Development of High-Resolution GEOINT Feature Data and Constructing Correlated Databases

    SBC: CG2, Inc.            Topic: SOCOM06012

    Our solution to the automated feature extraction problem will leverage the material properties that can be inferred from combining multispectral imagery with high resolution elevation data or LIDAR data using a trainable knowledge base. Multiple imaging bands provide a more complete picture of the material involved than ordinary RGB. This can help distinguish between a green grass lawn and a gre ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  5. Improved Iodine Injection, Mixing and Pressure Recovery

    SBC: CU AEROSPACE L.L.C.            Topic: MDA05011

    The primary objective of CU Aerospace's Phase I work will be to investigate innovative iodine injection concepts for the chemical oxygen-iodine laser (COIL) that improve mixing at higher total pressures. The designs will be made to significantly improve the pressure recovery of COIL systems while retaining efficiency. The results of the Phase I research will lay the foundation for developing a h ...

    SBIR Phase I 2006 Department of DefenseMissile Defense Agency
  6. Advanced Multisensor Fused Track and Discrimination Architecture

    SBC: DECIBEL RESEARCH, INC            Topic: MDA06T003

    This effort proposes to design and demonstrate the concept of an innovative, Advanced BMDS Multisensor Fused Track and Discrimination Architecture that will enhance the generation of a Single Integrated Picture of the Battlespace. This Architecture permits enhancement of sensor-to-sensor track correlation handover of objects while characterizing their lethality for later target designation purpos ...

    STTR Phase I 2006 Department of DefenseMissile Defense Agency
  7. Advanced Signal Processing to Enhance Target Detection & Discrimination In High Countermeasure Environment

    SBC: DECIBEL RESEARCH, INC            Topic: MDA06T002

    ABSTRACT: Missile defense radars use wideband waveforms along with coherent processing to extract detailed target features and perform high range /Doppler resolution functions. Reduced RCS targets embedded in high clutter (chaff, or chaff-like fuel debris, etc.) environments present significant challenges. Closely spaced objects and decoys accompanying targets of interest inherently increase the c ...

    STTR Phase I 2006 Department of DefenseMissile Defense Agency
  8. Solid-State Electrically Controllable Rocket Motors For Safe Attitude Control Systems

    SBC: Digital Solid State Propulsion, Inc            Topic: MDA05069

    The invention of Electrically Controlled Extinguishable Solid Propellants (ECESP) over the last five years opens the door for completely new ways of controlling solid rocket motors. When the propellant is fitted with electrodes and a current of the required voltage is applied, the propellant ignites and continues to burn until the voltage is removed. Throttle control and multiple restarts have b ...

    SBIR Phase I 2006 Department of DefenseMissile Defense Agency
  9. Strained Layer Superlattice Using HgTe for VLWIR Detection

    SBC: EPIR TECHNOLOGIES INC            Topic: MDA04082

    Despite considerable progress with bulk HgCdTe photovoltaic technology, difficulties persist in sensing wavelengths longer than 12 microns with bulk alloy material due to the limitations imposed by high Auger recombination rates and large tunneling dark currents. Strained layer superlattices using HgTe layers and lattice mismatched layers based on ZnTe alloys are an extremely promising alternative ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  10. Automated Wafer Polishing for Epi-ready Antimony-based Substrate Materials

    SBC: EPIR TECHNOLOGIES INC            Topic: MDA04083

    EPIR Technologies demonstrated in Phase I of this project the ability to polish small GaSb wafers to an epi-ready state. Surfaces smoother than those of typical wafers sold by the best supplier of GaSb substrates for SL growth were obtained. In Phase II, we propose to build upon the experience gained in Phase I to establish a more automated polishing procedure to consistently obtain even smoothe ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government