You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. An Ultra-Precise System for Electrical Resistivity Tomography Measurements

    SBC: Multi Phase Technologies LLC            Topic: 06

    One of the most widely used geophysical methods for monitoring flow within the shallow subsurface is Electrical Resistivity Tomography (ERT). The latest generation of ERT systems can monitor data to a precision of around 1%, allowing in situ changes to be interpreted within a few percent. In turn, subsurface temperature changes can be monitored to within a few degrees Centigrade, low levels of t ...

    SBIR Phase II 2006 Department of Energy
  3. Muon Capture, Phase Rotation, and Precooling in Pressurized RF Cavities

    SBC: MUONS INC            Topic: 37

    Bright muon beams are required for muon colliders, neutrino factories, and intense muon sources. To create the beams, high energy protons hit a target to generate pions that decay into a diffuse cloud of muons. The muon cloud is then: (1) captured in strong magnetic fields, (2) bunched, (3) phase-energy rotated by strong radio frequency (RF) electric fields, and (4) pre-cooled by passing the be ...

    STTR Phase II 2006 Department of Energy
  4. Reverse Emittance Exchange for Muon Colliders

    SBC: MUONS INC            Topic: 36

    Muon collider luminosity depends on the number of muons in the storage ring and on the transverse size of the beams in collision. As currently envisioned, adequate luminosity cannot be provided without large muon intensities, due to insufficient ionization cooling of the beam. Unfortunately, the proton drivers needed to produce these large muon intensities are expensive, and the decay of the lar ...

    STTR Phase II 2006 Department of Energy
  5. In Situ Optical Monitor for Waste Tank Gases

    SBC: VISTA PHOTONICS, INC.            Topic: 06

    Department of Energy waste storage tanks require continuous monitoring of species in solid, liquid and gaseous phases. Gas phase species of interest include ammonia, methane, carbon dioxide and hydrogen. This project will develop in situ optical sensors that selectively and sensitively detect ammonia, methane, carbon dioxide, hydrogen and oxygen in the waste tank headspace. The sensors will tak ...

    SBIR Phase II 2006 Department of Energy
  6. Optical Carbon Dioxide Field Isotope Ratiometer

    SBC: VISTA PHOTONICS, INC.            Topic: 08

    Anthropogenic greenhouse gas emissions are best quantified by determining their carbon dioxide isotope ratios. However, the required precision represents a challenge to optical measurement techniques under field deployment conditions. This project will develop a compact, rugged, mid-infrared spectrometer capable of determining isotopic carbon dioxide ratios at atmospherically relevant levels. I ...

    SBIR Phase II 2006 Department of Energy
  7. Production of Phenol Formaldehyde Resins from Recycled Composite Materials

    SBC: Adherent Technologies, Inc.            Topic: N/A

    The recycling of thermoset composite materials produces valuable fibers and a liquid hydrocarbon byproduct. The liquid hydrocarbons constitute a potential hazardous wastestream that could prevent the recycling process from being adopted on a large scale by government and industrial users. This project addresses the conversion of these liquid hydrocarbons into useful products. Phase I showed tha ...

    STTR Phase II 2001 Department of Energy
  8. Low-Temperature Composite Recycling Process

    SBC: Adherent Technologies, Inc.            Topic: N/A

    60770 Recycling of carbon fiber reinforced composites is an important task for the future development of this class of materials. Without recycling, the full potential of using composite materials in low-cost applications like automobile production, along with the resulting fuel economy, will not be realized. Recycling the composites will also have a huge ecological benefit by removing a w ...

    SBIR Phase II 2001 Department of Energy
  9. Utilization of Hydrocarbon Fuels in Low-Temperature Solid Oxide Fuel Cells

    SBC: APPLIED THIN FILMS, INC            Topic: N/A

    60633 Fuel cells are widely viewed as the most desirable future power generation method, because of their unique combination of high efficiency, low emissions, size flexibility, and quiet operation. Despite these unique features, the high cost of fuel cells compared with competing technologies has prevented commercial introduction. One of the key factors that increases fuel cell power plant ...

    SBIR Phase II 2001 Department of Energy
  10. Synthesis of New Solid Polymer Electrolytes

    SBC: TPL, INC            Topic: N/A

    60550 The chemical and thermal instabilities of liquid electrolytes have hampered the performance of lithium batteries in terms of power and energy density, cycle and self life, and safety. While solid polymer electrolytes (SPEs) have the potential to overcome these problems, some of their electrochemical properties, such as ionic conductivity, are not satisfactory for high performance lit ...

    SBIR Phase II 2001 Department of Energy
US Flag An Official Website of the United States Government