Award Data

During Phase I, Management Sciences, Inc. (MSI) proved feasibility of adapting their current technology into a product capable of improving performance resulting in increased efficiency and extended life cycles of heat pumps. The resultant product is a tool named the Heat Pump Sentient (HP-Sentient). The HP-Sentient will improve performance and reduce maintenance costs through aggressive goal-seek ...

The overall goal of this Project is to develop an innovative inexpensive optical technology and rugged and portable instrumentation for highly sensitive, selective, continuous measurement of atmospheric ammonia for air pollution monitoring. Environmental studies have proven that ammonia presents a significant environmental hazard; therefore, accurate monitoring and control of NH3 concentration is ...

Baldwin Environmental Inc. (BEI) successfully completed an SBIR Phase I project that demonstrated the feasibility of designing and producing a Fine and Coarse Particulate Monitoring System (FCPMCEMS). This system simultaneously measures and reports mass concentrations of fine and coarse particulate material using Atmospheric Dispersion Simulation and Beta Attenuation Monitoring (BAM). A design a ...

There is an acute need for a networked chemical sensor that is inexpensive enough to allow it to be treated as a disposable item - deployed and left in-place until the end of its useful life, or until operations move out of communications range. Electrochemical microarray sensors can be fabricated at low enough unit cost to make the development of a disposable sensor node feasible. These sensors ...

Our solution to the automated feature extraction problem will leverage the material properties that can be inferred from combining multispectral imagery with high resolution elevation data or LIDAR data using a trainable knowledge base. Multiple imaging bands provide a more complete picture of the material involved than ordinary RGB. This can help distinguish between a green grass lawn and a gre ...

Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

Lead in household paint and dust is a serious health hazard as low level lead exposure can result in a number o adverse health effects, especially in children. On-site and real-time detection and quantification of lead in the paint/dust is very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as x-ray fluorescence ...

LaSys, Inc., utilizing the unique spectral characteristics of its proprietary fractal-microcavity composite will be used to perform the proof-of-concept research required to develop an ultra-sensitive optical detector of low concentration of arsenic in water based on the Raman effect. Phase I technical objectives are designed to demonstrate that fractal microcavity composite - SERS spectroscopy i ...

Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

Southwest Sciences proposes the development of an optical, near-ultraviolet chlorine dioxide sensor having a measurement range for about 0.01 to 2000 ppm with a response time of less than 10 seconds. The sensors will be compact - about the size of a 1quart milk carton including electronic and optics - operate a low power, and be outfitted with wireless communications interface to permit remote, u ...