You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Micro-Positioner Replacement of Piezo Actuators in Long-working Distance Interference Microscopes

    SBC: E. M. Optomechanical, Inc.            Topic: N/A

    The NIST patented six-degree of freedom micropositioner technology associated with this subtopic has been identified by E M Optomechanical, Inc. (EMOM) as a technology that could be incorporated into the company¿s long-working distance interference microscopes. A key element in these microscopes is a piezo-actuator device, installed in a manual pitch/yaw mount, which translates a small flat mirro ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  2. High Power, Mid-Infrared Fiber Supercontinuum Light Source

    SBC: MESA PHOTONICS LLC            Topic: N/A

    Modern supercontinuum (SC) light sources are generated by non-linear interactions between ultrashort laser pulses and optical fibers. These light sources have high brightness and are spatially coherent. Output in near-ultraviolet to near-infrared wavelength ranges has been demonstrated. SC wavelength ranges are constrained by the transmission and dispersion properties of the fibers. Previously, ou ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  3. Innovative Residential Fire Detection

    SBC: SOUTHWEST SCIENCES INC            Topic: N/A

    Southwest Sciences¿ Phase 2 SBIR project will lead to development of residential fire sensing systems based on recently developed, low cost temperature and optical imaging sensors combined with newly introduced highly miniaturized, micropower CO sensors. Sensor modules will be part of a low power wireless network. Each module will be about ½ the size of a business card, a few mm thick, and w ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  4. Microcalorimeter Alpha Spectrometer for Analysis of Nuclear Material

    SBC: STAR CRYOELECTRONICS, LLC            Topic: N/A

    A key factor of international efforts to identify and suppress the supply of and demand for nuclear materials, and thereby to deter potential traffickers, is the ability to accurately identify contradicted material and ultimately to trace it back to its origin. Alpha particle spectroscopy is widely used in nuclear forensics to assay trace quantities of sensitive nuclear materials, but the limited ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  5. Low-Cost, Networked, Disposable Chemical Sensor

    SBC: STREAMLINE AUTOMATION LLC            Topic: SOCOM05010

    There is an acute need for a networked chemical sensor that is inexpensive enough to allow it to be treated as a disposable item - deployed and left in-place until the end of its useful life, or until operations move out of communications range. Electrochemical microarray sensors can be fabricated at low enough unit cost to make the development of a disposable sensor node feasible. These sensors ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  6. Automated Feature Extraction Capabilities for the Development of High-Resolution GEOINT Feature Data and Constructing Correlated Databases

    SBC: CG2, Inc.            Topic: SOCOM06012

    Our solution to the automated feature extraction problem will leverage the material properties that can be inferred from combining multispectral imagery with high resolution elevation data or LIDAR data using a trainable knowledge base. Multiple imaging bands provide a more complete picture of the material involved than ordinary RGB. This can help distinguish between a green grass lawn and a gre ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  7. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  8. Individual Cooling Equipment

    SBC: R*BAT, INC.            Topic: SOCOM06009

    Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  9. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    In this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  10. Application of Turbine Engines in Naval Special Warfare (NSW) Craft

    SBC: Marine Turbine Technologies, L.L.C.            Topic: N/A

    The objective is to modify and test gas turbine engines presently installed in/on marine craft to demonstrate that by adapting technology used on street legal vehicles can be used to reduce the heat and noise levels in marine craft. Whether or not the IR15dB level or lower, and the above water acoustic/noise level to 60dB level or lower can be achieved, is a matter that can only be demostrated by ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government