Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Friction Materials & Manufacturing Process

    SBC: Thor Technologies, Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project will demonstrate a unique method of producing hybrid metal ceramic composite friction materials.Friction materials are the replacement elements in braking,clutch and transmission systems.In this effort,Thor Technologies,Inc.will team with Los Alamos National Laboratory (LANL)and an aircraft braking systems company to integrate two novel techn ...

    SBIR Phase I 2002 National Science Foundation
  2. Application of Turbine Engines in Naval Special Warfare (NSW) Craft

    SBC: MARINE TURBINE TECHNOLOGIES, LLC            Topic: N/A

    The objective is to modify and test gas turbine engines presently installed in/on marine craft to demonstrate that by adapting technology used on street legal vehicles can be used to reduce the heat and noise levels in marine craft. Whether or not the IR15dB level or lower, and the above water acoustic/noise level to 60dB level or lower can be achieved, is a matter that can only be demostrated by ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  3. Combinatorial Development of Chitosan-Based Drilling Fluid Additives

    SBC: Venture Innovations, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project proposes to develop chitosan-derivatives through proprietary chemistries for use as additives in oil and gas drilling fluids. For this specific application, it is important to tailor the viscoelastic properties of the chitosan derivatives. Since little is known about how polymer structure affects polymer properties, a combinatorial ap ...

    SBIR Phase I 2002 National Science Foundation
  4. Direct Manufacturing Method for Miniature Medical Components

    SBC: OPTOMEC, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I Project will develop a hybrid, co-flow laser material deposition system in order to enhance the ability to fabricate materials with nanocrystalline microstructures and to produce miniature, three dimensional structural components such as dental implants and stents directly from a CAD (Computer Aided Design) solid model. This work will leverag ...

    SBIR Phase I 2002 National Science Foundation
  5. Extreme Environment Hand-Wear system

    SBC: Kreamer Sports, Inc.            Topic: N/A

    "Our Phase I study proved the feasibility of using monofilament carbon tow and thin resistant wire in a glove system to provide an adequate heat source to keep a soldier's hands comfortable in extreme cold temperatures while retaining hand dexterity andtactility. Our objectives during Phase II are to (1) incorporate our heat generation process into a super thin, non-melting, flame-rerardant materi ...

    SBIR Phase II 2002 Department of DefenseSpecial Operations Command
  6. High Density Resistor Arrays via Soft Lithography

    SBC: TPL, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will research passive components in electronic circuits increases, new interconnect technologies, such as embedded passives, are under development to optimize utilization of board real estate. For embedded passives, dimensional accuracy translates into control over component values, and so there is a need for high-precision fabrication ...

    SBIR Phase I 2002 National Science Foundation
  7. Individual Cooling Equipment

    SBC: R*BAT, INC.            Topic: SOCOM06009

    Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  8. N/A

    SBC: Gratings, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop thin film (less than 50 microns) crystalline silicon (Si) photovoltaic (PV) cells. At present, Si wafers account for approximately 50 per cent of the completed PV module cost. Weak near-infrared absorption requires 250-micron thick Si films to absorb available optical radiation. Preliminary calculations indicate that appro ...

    SBIR Phase I 2001 National Science Foundation
  9. N/A

    SBC: International Mezzo Technologies, Inc.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project seeks to develop commercially viable methods for the fabrication of high aspect ratio micro- and nano-structures for microfluidic applications using contact nano-printing. X-ray lithography will be used to produce molding tools to emboss structures in polymers. Microfluidic channels will be fabricated with ordered arrays of micro- and ...

    SBIR Phase I 2001 National Science Foundation
  10. N/A

    SBC: INTREPID, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will investigate a proprietary method of measuring atmospheric temperature starting at 10 meters above the surface. Our concept, if successful, will overcome the current Radio Acoustic Sounding System (RASS) low altitude and temperature resolution limits. The temperature measurement accuracy will be increased by at least a factor of tw ...

    SBIR Phase I 2001 National Science Foundation
US Flag An Official Website of the United States Government