Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Materials and Processing Methods for CMC Ducts

    SBC: Thor Technologies, Inc.            Topic: N/A

    Continuous fiber-reinforced ceramic composites (CFCCs) are inherently wear and oxidation resistant, retain strength at higher temperatures and have lower specific densities than competing metal systems. The hot sections of gas turbine engines and relateddevices are exposed to aggressive gaseous species at high temperature. Because of their thermochemical stability and oxidation resistance, continu ...

    SBIR Phase I 2001 Department of DefenseArmy
  2. All Digital High Speed Visible Imaging Array

    SBC: AMAIN ELECTRONICS CO., INC.            Topic: N/A

    "Amain proposes to develop a large staring array monolithic visible light camera with extremely low power analog to digital conversion, A/D, at each pixel. The approach is based on oversample A/D techniques developed for audio applications, generally knownin the industry as delta sigma A/D. Each pixel of the focal plane array will contain a patented converter named MOSAD, Multiplexed OverSample A/ ...

    SBIR Phase I 2002 Department of DefenseArmy
  3. An Ultra-Wideband Antenna Built Into a Parachute

    SBC: FARR RESEARCH, INC.            Topic: N/A

    While explosive munitions are quite effective at causing damage due to blast and fragments, their radius of damage is somewhat limited. We seek here to introduce a method of increasing the damage radius by adding an RF weapon system to the munition,consisting of an impulse source and a broadband antenna. By this technique, additional damage will be created in the area by upsetting computers and co ...

    SBIR Phase I 2001 Department of DefenseArmy
  4. An Ultra-Wideband Antenna Built Into a Parachute

    SBC: FARR RESEARCH, INC.            Topic: N/A

    "On the modern electronic battlefield, a weapon that disables the enemy's electronics can be more useful than a weapon that executes a killing strike. This is possible because a radio frequency (RF) weapon that attacks electronics can be effective over amuch larger radius than a high-explosive (HE) weapon. For example, a single 155-mm artillery shell has a disabling blast radius limited to a few m ...

    SBIR Phase II 2002 Department of DefenseArmy
  5. Application of Turbine Engines in Naval Special Warfare (NSW) Craft


    The objective is to modify and test gas turbine engines presently installed in/on marine craft to demonstrate that by adapting technology used on street legal vehicles can be used to reduce the heat and noise levels in marine craft. Whether or not the IR15dB level or lower, and the above water acoustic/noise level to 60dB level or lower can be achieved, is a matter that can only be demostrated by ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  6. Bayesian Linear Time Software Agents for Supporting Faster than Real-time Course Of Action Analysis

    SBC: MANAGEMENT SCIENCES INC            Topic: A06189

    We propose research to extend Management Sciences’ existing Cognitive Bayesian (CBNX) architecture to create a family of Situation Aware Reflective Cognitive Agents (SARCA) supporting real time information management and cognitive information fusion. This framework will enable development of high performance Modeling and Simulation (M&S) applications fusing data and information from operational ...

    SBIR Phase I 2006 Department of DefenseArmy
  7. Benchmark Part for Form, Fit and Functional Testing for the Laser Engineered Net Shaping (LENS) Process

    SBC: OPTOMEC, INC.            Topic: N/A

    During this Phase I effort Optomec will demonstrate that the Laser Engineered Net Shaping (LENS) process provides a viable means for both repair and fabrication of functional prototype components for the MPH needs. This work will serve to establish abenchmark part that can be used for calibration and set up of the LENS equipment, as well as other commercially available RP equipment. The goal of ...

    SBIR Phase I 2002 Department of DefenseArmy
  8. Broadband Focused Radar at Ground Penetrating Frequencies for Detecting Mines, Unexploded Ordnance, or Mobility Related Surface Layers

    SBC: INTREPID, INC.            Topic: N/A

    The above ground penetrating radar systems for close-up surveying of terrain are inadequate for the detection of frozen or thawed soil layers (which is important for mobility determination) and for locating near surface buried objects such as pipes, wastecontainers, mines, or unexploded ordnance. Current antenna systems are not capable of providing a small spot size at a useful frequency. Antenn ...

    SBIR Phase I 2001 Department of DefenseArmy
  9. Common Fuel Engines for Powered Parafoils and other Airborne Systems

    SBC: GSE, Inc.            Topic: N/A

    "The military "Single Fuel Forward" policy under DOD Directive 4140.25 has placed high priority on the implementation of heavy fuel engines (HFE) capable of operating on logistically available kerosene based fuels. (ie: JP-5, JP-8, DF-2) Subsonic airborneapplications defined by maximum endurance and payload capacity require the HFE to have outstanding specific weight ratios below 1.5 lbs/hp as wel ...

    SBIR Phase I 2002 Department of DefenseArmy
  10. Cooling Objectives and Operative Leverage (COOL) Techniques

    SBC: International Mezzo Technologies, Inc.            Topic: A04248

    The objective of this Phase II program is to develop and demonstrate a high performance heat exchanger technology for military ground vehicles such as the up-armored HMMWV. Mezzo will build a heat exchanger that is more compact, provides improved heat transfer performance, and meets the demands of the harsh environments (such as resistance to sand and dirt fouling) to which military vehicles and ...

    SBIR Phase II 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government