Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 3D Woven Composites for New and Innovative Impact and Penetration Resistant Systems (MSC P1T05-114)

    SBC: Materials Sciences LLC            Topic: N/A

    The objective of the work proposed herein is to develop innovative methodologies and techniques for the use of 3D woven composites with enhanced structural and ballistic characteristics for wide ranges of armor and structural applications. A family of 3Dintegrally woven composites, which utilizes multi-axial weave designs, have been examined and analyzed in the Phase I study. These innovative 3D ...

    STTR Phase I 2001 Department of DefenseArmy
  2. 3D Woven Composites for New and Innovative Impact and Penetration Resistant Systems (MSC P1T05-114)

    SBC: Materials Sciences LLC            Topic: N/A

    The objective of the work proposed herein is to develop innovative methodologies and techniques for the use of 3D woven composites with enhanced structural and ballistic characteristics for wide ranges of armor and structural applications. A family of 3Dintegrally woven composites, which utilizes multi-axial weave designs, have been examined and analyzed in the Phase I study. These innovative 3D ...

    STTR Phase II 2001 Department of DefenseArmy
  3. A Compact, Transportable JP-8 Reformer

    SBC: SIERRA ENGINEERING, INC.            Topic: N/A

    "Highly efficient, high energy density electrical generation systems are needed for ground based assets. Fuel cell electrical generation systems provide high efficiency, low emissions, and low thermal signatures. A cost effective, transportable reformersystem, providing hydrogen, while using a military fuel such as JP-8, and meeting military operational requirements does not exist. The develo ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  4. A Component-Based Software Framework for Large Scale Systems

    SBC: MZA Associates Corporation            Topic: N/A

    "We propose to develop a component-based software framework for developing large-scale software and hardware/software systems based upon an innovative software architecture we originally developed for use in the modeling and simulation of complex systems.This architecture make use of the familiar concepts and terminology of systems engineering - systems, subsystems, inputs, outputs, and so forth - ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  5. A Decision Aid for a Surveillance Satellite Crew Shift Supervisor

    SBC: CHI Systems, Inc.            Topic: N/A

    To be effective in today's threat environment, the Air Force's Global Engagement doctrine asserts that personnel be responsive, innovative, adaptable, and agile. This will be particularly important for the Space-Based Infrared System (SBIRS) Low CrewChief. The SBIRS Low Crew Chief will have to manage a team with frequently changing personnel, groups of personnel with different specializations, a ...

    SBIR Phase I 2001 Department of DefenseAir Force
  6. A Fail-Safe Controllable Magneto-Rheological Fluid Smart Pad/Damper System for Submarine Based Weapon Shock and Vibration Mitigation

    SBC: Advanced Materials and Devices            Topic: N/A

    "The goal of the proposed Phase I effort is a feasibility study on the design and development of an innovative, fail-safe, controllable magneto-rheological fluid (MRF) smart pad for shock and vibration mitigation of Trident submarine based vertical launchweapon systems. The objective of this project is to explore the design feasibility of the proposed MRF shock absorber system which consists of a ...

    SBIR Phase I 2002 Department of DefenseNavy
  7. A high temperature coating integrated with a high performance heat exchanger for turbine blade tip cooling

    SBC: International Mezzo Technologies, Inc.            Topic: N/A

    "Turbine blade tip failure is one of the most critical issues facing future development of gas turbine engines. This proposal describes an inexpensive method to deposit a highly effective micro heat exchanger made from a MCrAlY alloy on the tip of ablade. The combination of the very efffectively cooled tip and the excellent mechanical and oxidation resistant properties of MCrAlY alloys will a ...

    SBIR Phase I 2002 Department of DefenseNavy
  8. A Highly Sensitive Array-Based POCT Sensor for Respiratory Pathogens

    SBC: CHI Systems, Inc.            Topic: N/A

    Although computerized patient records have been the focus of much recent research and a number of commercial systems have been developed, they have met resistance from the clinician user community because key end-user issues have not been addressed.Previous research by the proposed research team applied cognitive and ethnographic methods to analyze clinician needs for interacting with patient reco ...

    SBIR Phase I 2001 Department of DefenseOffice of the Secretary of Defense
  9. A Hybrid NS/PNS Unstructured-Grid Based Efficient CFD Solver Using Zonal Strategy

    SBC: SAGE SYSTEMS TECHNOLOGIES, INC.            Topic: N/A

    "Development of an unstructured-grid based PNS/NS CFD solver provides advances in unstructured-grid technology to provide a more efficient analysis tool. Over a wide range of the missile flight trajectories, a PNS methodology is sufficient and a more costeffective approach to provide CFD analysis capability than a traditional NS approach. Overall memory and the CPU requirement can be reduced to ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  10. A Linked Engineering Knowledge Base Tool-Set for Textile Composite Material Forms (MSC P11G26-105)

    SBC: Materials Sciences LLC            Topic: N/A

    It is expected that accelerated insertion of materials (AIM) will be facilitated through development of linked engineered material databases, that are capable of conducting quick virtual testing of new materials, that is supplemented by limited physicaltesting, rather than proceeding directly to complete experimental characterization. To address this need for reduced insertion time, Materials Sci ...

    SBIR Phase I 2001 Department of DefenseAir Force
US Flag An Official Website of the United States Government