You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Individual Cooling Equipment

    SBC: R*BAT, INC.            Topic: SOCOM06009

    Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  2. Universal Longwire Antenna Module for Unmanned Aerial Vehicles and Aircraft

    SBC: STAR-H CORP.            Topic: SOCOM06003

    Three trailing wire antenna concepts will be evaluated to find the design which best meets the requirements of the solicitation. Operational and design experience with the widely-used dual trailing wire antenna will represent the starting point for this analysis. Concepts for a single trailing wire, which will have wider applicability will also be studied. A third concept, using a more unique ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  3. Worldwide C4I for Special Operations Forces Combatant Craft

    SBC: Advanced Concepts, Inc.            Topic: N/A

    "This Phase I SBIR Project will develop a complete set of guiding documents which shall constitue a roadmap for implementing and deploying the Worldwide C4I for Special Operations Forces Combatant Craft solution. The documentation set will include analysisand results for algorithms in the areas of data compression, and encryption schemes. The document set shall contain the following: Concept of ...

    SBIR Phase I 2002 Department of DefenseSpecial Operations Command
  4. Extreme Environment Hand-Wear system

    SBC: Kreamer Sports, Inc.            Topic: N/A

    "Our Phase I study proved the feasibility of using monofilament carbon tow and thin resistant wire in a glove system to provide an adequate heat source to keep a soldier's hands comfortable in extreme cold temperatures while retaining hand dexterity andtactility. Our objectives during Phase II are to (1) incorporate our heat generation process into a super thin, non-melting, flame-rerardant materi ...

    SBIR Phase II 2002 Department of DefenseSpecial Operations Command
  5. A Low Profile, Horizontal Waterjet for Combatant Craft Signature Reduction

    SBC: ORBITAL RESEARCH INC            Topic: N/A

    "Propulsion systems aboard current SOCOM Combatant Craft utilize propulsor systems that produce large wake forms, such as rooster tail. Large wake forms exaggerate the true visible and radar cross section of the Combatant Craft and thus increase probabilityfor detection by littoral sensor and radar systems. Common propulsor designs, which originated from the commercial and recreational industries, ...

    SBIR Phase I 2002 Department of DefenseSpecial Operations Command
  6. Remote Runway Survey System to Measure Soil Type, Load Bearing Capacity, Slope and Grades

    SBC: ZYBRON OPTICAL ELECTRONICS, INC.            Topic: N/A

    "In order to meet the remote runway survey system requirement, by using many cutting edge technologies, a very innovative system is proposed. The remote runway survey includes 4 steps (or the survey system consists of 4 subsystems). In the first step, we will use Remote Sensing Pictures (RSP) from satellite and airplane to roughly determine which area is suitable for runway. In the second ste ...

    SBIR Phase I 2002 Department of DefenseSpecial Operations Command
  7. Application of Turbine Engines in Naval Special Warfare (NSW) Craft

    SBC: Marine Turbine Technologies, L.L.C.            Topic: N/A

    The objective is to modify and test gas turbine engines presently installed in/on marine craft to demonstrate that by adapting technology used on street legal vehicles can be used to reduce the heat and noise levels in marine craft. Whether or not the IR15dB level or lower, and the above water acoustic/noise level to 60dB level or lower can be achieved, is a matter that can only be demostrated by ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  8. SOF Tactical Information Assistant

    SBC: TECHNOLOGY INTERNATIONAL INCORPORATED OF VIRGINIA            Topic: N/A

    This Phase I SBIR Project will involve performance of a study to evaluate current commercial display technologies, head-mounted and wrist-mounted display configurations, and software that could fulfill the SOF requirements. The study will emphasizeidentification of the best display at the lowest power consumption. Based on the evaluation of current practice, innovative technology ideas will be pre ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  9. High Performance Assault Zone Marking System

    SBC: ZYBRON OPTICAL ELECTRONICS, INC.            Topic: N/A

    Special Operations Forces is looking for assault zone marking systems to facilitate instrument approaches of fixed and rotary wing aircraft under extremely low ceiling/visibility conditions (200' ceiling/0.5 mile visibility). After successfully finishingthe phase-I project, in this phase-II effort, we will concentrate on the whole assault zone marking/lighting system design, calculation/simulation ...

    SBIR Phase II 2001 Department of DefenseSpecial Operations Command
  10. MICRO COMPUTER BASED PARALLEL PROCESSING SYSTEM FOR CODE COMPUTATIONS

    SBC: Risk Management Systems            Topic: N/A

    THE RESEARCH PROGRAM WILL DEVELOP A MICROCOMPUTER BASED SYSTEM OF HARDWARE AND SOFTWARE WHICH WILL ALLOW THE USER TOEXECUTE MAINFRAME BASED CODES ON THE MICROCOMPUTER. IN ADDITION PARALLEL EXECUTION OF SEVERAL CODES AT ONCE IS POSSIBLEA SPECIAL INPUT AND OUTPUT PROCESSOR MODULES WILL ALSO BE DEVELOPED TO DEMONSTRATE THE USER FRIENDLY CAPABILITIES OF THE SYSTEM AND FACILITATE INPUT PREPARATION AND ...

    SBIR Phase II 1989 Nuclear Regulatory Commission
US Flag An Official Website of the United States Government