Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Horizon: Validation of an improved method for rapid characterization of protein aggregates in biologic drugs for increased quality and safety

    SBC: OPTOFLUIDICS, INC.            Topic: NA

    Optofluidics and the University of Delaware propose to complete the development of the Horizon technology and carry out validation via a comprehensive multi-site study. The technology is a subvisible particle analyzer pioneered during Phase I. The technology is designed to fill two critical gaps in biopharmaceutical product development: (1) Scientists can count and image particles with current too ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  2. Acoustic Signature Reduction of Special Operations Forces Aircraft Using Flow-Excited Cancellation Sources

    SBC: KCF TECHNOLOGIES, INC.            Topic: SOCOM163001

    KCF Technologies in partnership with Lockheed Martin, Inc. proposes a lightweight, low drag, quasi-active noise control system to reduce the acoustic signatures of existing SOF fixed wing aircraft. The proposed solution is based on integrating flow-excited resonators near the blade tips of the propeller, commonly the aircrafts major noise source. The resonators are tuned actively to generate anti- ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  3. Ultra-High Temperature Durable CMCs for UAVs: A Feasibility Study

    SBC: Plus Designs, Inc.            Topic: SOCOM163002

    The opportunity sought after in this proposed effort is the replacement of existing underperforming components within UAV engines with advanced CMC materials that will offer reduced weight, higher temperature capabilities, improved lifetime, and the possible elimination of any cooling requirements. The advanced CMC material development will depend upon the selected engine component and concerns r ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  4. Advanced Tactical Facial Recognition at a Distance Technology

    SBC: TAU TECHNOLOGIES LLC            Topic: SOCOM163003

    Tau Technologies leads a team with proven experience in applying technology to solve real world challenges. Our program manager was the Principal Investigator at Battelle Memorial Institute on a project that successfully developed and demonstrated a 300-meter range, man-portable facial recognition system for SOCOM. This proposal will incorporate newer technology and algorithms to improve accurac ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  5. Development of Moisture Channeling Textiles

    SBC: Advanced Cooling Technologies, Inc.            Topic: SOCOM17002

    In response to DoD SBIR topic SOCOM17-002 Moisture Wicking Pathway Treatment for Textiles, Advanced Cooling Technologies, Inc. (ACT) proposes to develop an innovative moisture channeling textile which has the ability to control the moisture transportation through certain pathways on the textile. With the unique wettability pattern designs, moisture generated from the skin can travel along the pre- ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  6. LinkStar, a high performance, secure, integrated flight computer and radio system for CubeSats

    SBC: SCI_ZONE, INC.            Topic: SOCOM17003

    sci_Zone is seeking to develop LinkStar, an integrated flight computer and radio system/hosted payload for cubesats. The goal of this payload is to become the heart of future cubesats to provide a secure, high performance flight computer with integrated communications framework that uses no more than 3W average power and fits within 0.5U. The heart of the LinkStar system is the Xilinx Zynq UltraS ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  7. CubeSat Laser Communications (CubeSat LaserCom)

    SBC: A-TECH CORPORATION            Topic: SOCOM17003

    ATA proposes to conduct feasibility studies and develop a CubeSat Laser Communications (CubeSat LaserCom) system that enables high data rate communications from a CubeSat to ground terminals, GEO terminals, and other CubeSats. Our proposed CubeSat LaserCom terminal integrates advanced ATA line-of-sight stabilization, tracking and pointing technologies with space-qualified laser and detector techn ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  8. Individual Cooling Equipment

    SBC: R*BAT, INC.            Topic: SOCOM06009

    Special Operations forces (SOF) operate in all weather conditions. It has identified a need for a micro-cooling system that can be vehicle mounted and man-portable, as well as provide a capability to cool vehicle mounted communications and electronics equipment. To meet the needs of SOF the system must be small, lightweight, quiet, low power, and gasless. We propose a compact micro-cooling system ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  9. Universal Longwire Antenna Module for Unmanned Aerial Vehicles and Aircraft

    SBC: STAR-H CORP.            Topic: SOCOM06003

    Three trailing wire antenna concepts will be evaluated to find the design which best meets the requirements of the solicitation. Operational and design experience with the widely-used dual trailing wire antenna will represent the starting point for this analysis. Concepts for a single trailing wire, which will have wider applicability will also be studied. A third concept, using a more unique ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  10. Extreme Environment Hand-Wear system

    SBC: Kreamer Sports, Inc.            Topic: N/A

    "Our Phase I study proved the feasibility of using monofilament carbon tow and thin resistant wire in a glove system to provide an adequate heat source to keep a soldier's hands comfortable in extreme cold temperatures while retaining hand dexterity andtactility. Our objectives during Phase II are to (1) incorporate our heat generation process into a super thin, non-melting, flame-rerardant materi ...

    SBIR Phase II 2002 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government