You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SmartCam 3D (SC3D)

    SBC: Rapid Imaging Technologies LLC            Topic: AF191010

    As USSOCOM continues to assess the future operating environment, implementing innovative solutions that promote situational awareness (SA) is of increasing importance. While situational awareness can be tied to a variety of data-types impacting a mission, for the purposes of this effort, situational awareness tied to geospatial intelligence will be the focus. When a warfighter enters an operating ...

    SBIR Phase II 2023 Department of DefenseSpecial Operations Command
  2. Cyber-Physical Trust Anchors with Definable Costs and Security

    SBC: REFINED IMAGING, LLC            Topic: 3

    A cyber-physical trust anchor is an essential component of a secure additive manufacturing supply chain. Customer discussions show a strong need for low-cost trust anchors as well as high-security, more costly trust anchors. The concept underlying our trust anchor enables implementations that can be described as good, better, best. The two physical-digital components are first embedded digital cod ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  3. Performance Enhancement of Hydrokinetic Arrays Using Reliable, Low-Cost Dynamic Components

    SBC: EMRGY INC            Topic: 1

    Emrgy, Inc., a pioneer in commercializing hydrokinetic power systems, is teaming with Premier Energy Holdings, Stanford University and University of Tennessee, Knoxville to develop a highly innovative solution to low-cost, riverine and tidal-based clean energy power generation. The project will implement “dynamic tuning” of the hydrokinetic turbine system to optimize performance across variabl ...

    SBIR Phase I 2021 Department of EnergyARPA-E
  4. Performance Enhancement of Hydrokinetic Arrays Using Reliable, Low-Cost Dynamic Components

    SBC: EMRGY INC            Topic: 1

    Emrgy, Inc., a pioneer in commercializing hydrokinetic power systems, is teaming with Premier Energy Holdings, Stanford University and University of Tennessee, Knoxville to develop a highly innovative solution to low-cost, riverine and tidal-based clean energy power generation. The project will implement “dynamic tuning” of the hydrokinetic turbine system to optimize performance across variabl ...

    SBIR Phase II 2021 Department of EnergyARPA-E
  5. Performance Enhancement of Hydrokinetic Arrays Using Reliable, Low-Cost Dynamic Components

    SBC: EMRGY INC            Topic: 1

    Emrgy, Inc., a pioneer in commercializing hydrokinetic power systems, is teaming with Premier Energy Holdings, Stanford University and University of Tennessee, Knoxville to develop a highly innovative solution to low-cost, riverine and tidal-based clean energy power generation. The project will implement “dynamic tuning” of the hydrokinetic turbine system to optimize performance across variabl ...

    SBIR Phase II 2021 Department of EnergyARPA-E
  6. Wideband and Analog Radio Frequency At a Distance

    SBC: BASCOM HUNTER TECHNOLOGIES INC            Topic: SOCOM211003

    Radio Frequency (RF) Fingerprinting is an important capability for the warfighter to identify threats and protect against malicious attacks on the RF spectrum. Most RF Fingerprinting techniques work by identifying small variations in a transmitted signal that are introduced by hardware components (capacitors, inductors, etc) of the transmitter within the non-linear regions of operation. Neural Net ...

    SBIR Phase I 2021 Department of DefenseSpecial Operations Command
  7. Man Portable Starlink System

    SBC: Dujud LLC            Topic: SOCOM212001

    Fundamental limitations to Ku-Band planar phased arrays used for the Starlink LEO constellation limit the portability and power efficiency of a man-portable Starlink user terminal. For example, due to these limitations the power output of the array is increased by 500% over the scan angle range for a nearly 24” diameter phased array, with reports of frequent drop outs of signal. Specifically, St ...

    SBIR Phase I 2021 Department of DefenseSpecial Operations Command
  8. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS, INC            Topic: 90

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the as-manufactured material properties are unknown. Attempts to predict performance of ...

    SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology
  9. Indirect Fire Aiming Device

    SBC: PRECISION TARGETING, LLC            Topic: SOCOM192003

    The proposed system will be capable of being weapon mounted on the weapon system, in the Bi-Pod Dovetial mount, for the measuring of the barrel elevation and cant angles in addition to the azimuth pointing reference. The outputs of the device will be transmitted, either wired or wireless (ISW compliant UWB radios) to the Fire Control Unit. The sub-MIL accuracy of the sensors will allow greater res ...

    SBIR Phase II 2020 Department of DefenseSpecial Operations Command
  10. Direct Performance Evaluation of Additive Manufacturing Process Plans

    SBC: INTACT SOLUTIONS, INC            Topic: None

    Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the asmanufactured material properties are not known. Attempts to predict performance o ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government