Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: Oceanit Laboratories, Inc.            Topic: SOCOM04007

    The current project will develop and demonstrate a prototype compact, power-efficient all-fiber lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current fiber-laser based lidar development efforts. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts in the current project will include prototype s ...

    SBIR Phase II 2006 Department of DefenseSpecial Operations Command
  3. Microfabrication and Micromaching

    SBC: Atometric, Inc.            Topic: N/A

    During Phase 1 Atometric developed and demonstrated principles of a four-axis micro machine. This machine is capable of machining metal parts that are sized within 50mm cube to an accuracy within one micron. Our goal is to develop a micro machine that is applicable to a broad commercial market. Three additional features need to be added to make the machine fully commercially viable. These three fe ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  4. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPS

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  5. Low-Cost Microcalorimeter Spectrometer for X-Ray Macroanalysis

    SBC: STAR CRYOELECTRONICS LLC            Topic: N/A

    A low-cost superconducting transition edge sensor (TES) microcalorimeter spectrometer is described for high energy and high spatial resolution X-ray energy dispersive spectroscopy and microanalysis. The proposed microcalorimeter instrument offers an energy resolution that is comparable to and potentially even better than wavelength dispersive spectrometers, thereby enabling the resolution of inter ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  6. Directed Energy Tactical Mission Analysis Code

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: SOCOM03007

    The Directed Energy Tactical Mission Application Code (DETMAC) is a mission planning simulation tool to model directed-energy weapon capabilities, target vulnerabilities, and environmental constraints. It will be used by mission planners to visualize an entire mission timeline and prompt development of optimal tactics, techniques and procedures for successful employment of new weapon capabilities ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  7. Miniature Quickscan Receiver

    SBC: Oceanit Laboratories, Inc.            Topic: SOCOM04004

    SOF tactical users lack a miniature threat warning receiver that permits them to monitor RF energy and exploit hostile wireless communications while on extended deployments that necessitate very low power budgets. Having this capability will save lives and enhance the probability of successful completion of dangerous missions. The purpose of this Small Business Innovative Research (SBIR) Phase II ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
  8. Vertical Wind Profile Data Collection Using Laser Technology on Unmanned Delivery Platforms.

    SBC: Oceanit Laboratories, Inc.            Topic: SOCOM04007

    The current project aims to demonstrate the feasibility of a compact, powerful, power-efficient lidar unit for wind profiling on board UAV's and other aircraft. The system leverages Oceanit's current development efforts building an eye-safe lidar for minute aerosol detection. A unique design provides a rugged system with no moving parts and little maintenance requirements. Efforts will include ...

    SBIR Phase I 2005 Department of DefenseSpecial Operations Command
  9. Alternative Power Sources

    SBC: SmartSpark            Topic: SOCOM04008

    This project will develop fully functional prototypes of a battery-free portable power source that can be deployed in remote, unattended locations. The power source will provide up to five watt-hours per day under extreme weather conditions for a minimum of four years without maintenance. The design relies on solar energy, and uses ultracapacitors for energy storage. A modular interconnect ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government