You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Improved Manufacturing Technologies for Polymer Matrix Composite Engine Components
SBC: 2PHASE TECHNOLOGIES, INC. Topic: AF06115This proposal addresses the development and use of lightweight, low thermal-capacity reformable tooling materials for high-temperature composite processing evaluation, parts prototyping, trial production and full-rate production of PMC engine components. The weight-saving promise of high-temperature polymer matrix composites (PMCs) for engine components is offset by the very high costs of parts m ...
SBIR Phase I 2006 Department of DefenseAir Force -
Closed Loop Composite Recycling Process
SBC: Adherent Technologies, Inc. Topic: AF06081The recycling of composites on a large scale is an unsolved problem. Currently, the material is either ground up into near-worthless fillers, incinerated, or digested using environmentally questionable technology. Adherent Technologies, Inc. has developed a number of technologies to reclaim valuable carbon fiber and other raw materials from these composites in a potentially economically feasible ...
SBIR Phase I 2006 Department of DefenseAir Force -
Miniature Unmanned Aerial Vehicle (MUAV)
SBC: Sensintel Inc. Topic: SOCOM05011This proposal will design, develop, and demonstrate a self-contained probe that will provide sensor videos on-demand to aircraft operators. A Miniature Unmanned Aerial Vehicle (MUAV) is proposed to meet this requirement. The MUAV will be capable of being launched from existing airborne aircraft platforms, including helicopters, and will be capable of being controlled by the aircraft operator in fl ...
SBIR Phase I 2006 Department of DefenseSpecial Operations Command -
Lightweight graphitic foam heat exchangers for fighter aircraft avionics
SBC: Sensintel Inc. Topic: AF06082In this phase I SBIR program, a team led by Advanced Ceramics Research Inc. (ACR) proposes an affordable manufacturing technique for high through-thickness thermal conductivity heat sinks for fighter avionics applications. ACR will use its Aquapour™ tooling materials as a support for the fabrication of the heat sinks. In the phase I program, ACR will fabricate sub-scale components, evaluate the ...
SBIR Phase I 2006 Department of DefenseAir Force -
High-Resolution Wide-Dynamic-Range MEMS-Based Closed-Loop Adaptive Optics System
SBC: AGILOPTICS Topic: AF05003AgilOptics’ Phase I SBIR proposed the development of a moire¢ Wave-Front Sensor (MWFS) test-bed to evaluate the MWFS design developed and patented by the University of New Mexico (UNM) and to extend the design for use in a closed-loop Adaptive Optic (AO) system with a Micro-Electro-Mechanical System (MEMS) Deformable Mirror (DM) corrector. Our Phase I results have shown that the MWFS provides i ...
SBIR Phase II 2006 Department of DefenseAir Force -
MEMS-Based Aero-optics Simulator System
SBC: AGILOPTICS Topic: AF06T030This effort joins the MEMS-based deformable mirror technology available from AgilOptics, a New Mexico small business, with the aero-optics technology of the University of Notre Dame to develop an Aero-optics Simulator. This simulator will develop a library of aero-optics patterns to simulate atmospheric distortions for test and evaluation of military or commercial beam control systems.
STTR Phase I 2006 Department of DefenseAir Force -
Optical Jitter Control for Laser Communications
SBC: A-TECH CORPORATION Topic: AF06255DoD is actively pursuing transformational communication technologies that need space, airborne, and ground nodes (transmitter/receiver sets) to acquire and stabilize laser communication links. A small, low-cost, but accurate optical inertial reference unit is an enabling technology for these systems. Optical telecommunications requires precisely pointed and stabilized transmit and receive paths ...
SBIR Phase I 2006 Department of DefenseAir Force -
Nano-Engineered Coating for Barrel Life Enhancement
SBC: APPLIED THIN FILMS, INC Topic: AF06350Extending gun barrel life has been a long-standing goal for the US Air Force and other DoD agencies. Currently-used chrome plated barrels are susceptible to erosion and corrosion which affects the accuracy of fired bullets due to material loss along the inner surface. The primary cause of barrel degradation is the poor quality chrome coating and attack of steel inner surface by hot gases and comb ...
SBIR Phase I 2006 Department of DefenseAir Force -
Formal-Verification-Based Tool for Deobfuscation of Tamper-Proofed Software
SBC: ARIES DESIGN AUTOMATION, LLC Topic: OSD06NC5The rapid increase in the use of the Internet in many aspects of our lives has led to an explosive growth in the spread of malware such as computer worms, viruses, and trojans. Security tools typically examine software for the presence of malware either by looking for specific byte signatures, or (more recently) by analyzing the candidate binary’s internal logic. However, it is surprisingly easy ...
STTR Phase I 2006 Department of DefenseAir Force -
Tuneable Low Frequency Microwave Source
SBC: ASR Corporation Topic: AF05006The proposed effort is to develop a frequency and waveshape agile pulse forming system. The pulse forming system is based on a Blumlein topology and allows a wide range of waveforms to be generated from a fixed set of mechanical hardware.
SBIR Phase II 2006 Department of DefenseAir Force