Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. High-Resolution, Two-Dimensional Neutron Imaging Detector

    SBC: NOVA SCIENTIFIC INCORPORATED            Topic: N/A

    NOVA Scientific proposes a high-resolution neutron imaging detector having a specialized neutron-sensitive electron amplified detection stage integrated with a cross-strip electronic readout capable of centroid averaging. Phase 1 efforts demonstrated spatial resolutions of 15 µm with high detection efficiency and moderate counting rates. The Phase 2 proposed program will carry out further detec ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. Enhanced Visual Obscurant and Rapid Dispersal System

    SBC: Physical Sciences Inc.            Topic: SOCOM06007

    Physical Sciences Inc (PSI) proposes to develop non-toxic obscurants based on the use of particle size engineering to optimize their extinction cross sections in the infrared region and the possible incorporation of wavelength selective absorbers into non-toxic FDA-approved host materials. The obscurant materials will be able to block all wavelengths from the visible to the thermal infrared (0.4 ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  4. Renewable Electric Energy Source for Special Operations Force (SOF) Maritime Combatant Craft

    SBC: TIAX LLC            Topic: SOCOM05001

    The US Special Operations Command (SOCOM) is seeking a quiet, reusable high-energy source for use on maritime Combatant Craft. The needs expressed by solicitation SOCOM05-001 are a very good match to the performance and operating features of a TIAX-developed Free Piston Stirling Engine (FPSE) power plant with integral linear alternators, power converter and digital control system--the TIAX "Micro ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  5. Low Cost, Lightweight, High Performance Transparent Armor

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    For military aircraft and land vehicles, there is a need for lightweight transparent armor that will provide a high level of ballistic protection at moderate cost. Hardfaced armor provides protection against (pointed) projectiles at very low arealdensities relative to other armor configurations. The current transparent hardface materials are either unaffordably expensive (sapphire, ALON), or low ...

    SBIR Phase II 2001 Department of DefenseSpecial Operations Command
  6. Composite Pilothouse for the Mark V Special Operations Craft

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    MK V SOC service failures have occurred where the windshield and entire pilothouse assembly have collapsed on wave impact. Such failures have even occurred at moderate speeds in fairly benign seas. The modular pilothouse can also suffer from structuraldegradation due to the disassembly operations required for C-5 transport.A composite pilothouse, with fully integrated windshields panels and modula ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  7. Clandestine Marker System

    SBC: Idolon Technologies            Topic: N/A

    The requirement for an inexpensive portable tagging system arises from the need totag and track U.S. military assets. The object of the Phase 1 is to determine thefeasibility of a clandestine barcode-like device, which has low energy/power requirements.This device will have a simple user interface and rugged construction. It is afurther objective to demonstrate the feasibiilty of a

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  8. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    In this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  9. SEAL Tactical Simulator

    SBC: REALITY BY DESIGN, INC.            Topic: N/A

    Reality by Design, an Advanced Interactive Systems company, proposes to fuse two compelling technologies to create a training simulator that is capable of recreating these emerging threats with stunning realism. This SEAL Tactical Simulator will progressfrom a collection of suitable scenarios to development of tactical responses to determining the relative merits of each option. This new trainin ...

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
  10. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: Tri-Cycle Product Design, Inc.            Topic: N/A

    The offerer proposes to design a fully responsive, Stuff-Proof Pilothouse Modification (SPPM), to the MK V Special Operations Craft. Utilizing a proven design methodology, advanced materials, and innovative engineering, a retro-fit to the existing deckstructure will be defined. A

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government