Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Advances in Ammonia Detection Systems

    SBC: Southwest Sciences, Inc.            Topic: 811

    This Phase II SBIR Research project will continue the development and testing of an innovative instrument for measuring fluxes of atmospheric ammonia to be delivered at the end of Phase II. The instrument will combine advances in diode laser technology with sophisticated laser modulation methods to quantify ammonia in a low pressure flow cell. The instrument¿s small size and light weight will ...

    SBIR Phase II 2003 Department of Commerce
  3. Miniature Chemical Ionization Mass Spectrometer for Measuring Tropospheric Ammonia

    SBC: Southwest Sciences, Inc.            Topic: N/A

    Southwest Sciences proposes to develop an automated, fast, and compact instrument to measure tropospheric ammonia from light aircraft. Ammonia plays important roles in aerosol particle chemistry, and particle characteristics are critical in understanding climate change and air quality. Existing ammonia instruments are either too large or measure too slowly for use on light aircraft. The unique ...

    SBIR Phase I 2003 Department of Commerce
  4. CAD Model and CR and MRI Scan Data to MCNP Input Format Conversion Software

    SBC: White Rock Science            Topic: N/A

    We will develop two programs to process data describing a model geometry and convert it to input acceptable to the Monte Carlo transport codes MCNP and MCNPX. One program will read CAD files in the ACIS solid body SAT format. Solid bodies, surfaces, and cells described in the SAT file will be converted to equivalent MCNP objects where available. Where there is no MCNP equivalent, such as for splin ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  5. Emerging Weapons Technology Evaluation Model

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: N/A

    Accelerated development of directed energy technologies has presented new problems to mission planners and weapon operators regarding the capabilities, lethality and performance of weapon systems. The Emerging Weapons Technology Evaluation Model willaddress these shortcomings by providing users of varying technical expertise 1) the ability to model a variety of weapons in various mission scenario ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  6. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  7. Wavelength Dispersive Fluorescence Detectors in Soft X-ray Region

    SBC: HD TECHNOLOGIES, INC.            Topic: N/A

    A wavelength dispersive x-ray fluorescence detector working in soft x-ray region has been proposed based on the diffraction principles. The detector uses graded multilayers as analyzers and large area detectors for data collection to achieve good energy resolution and to avoid count rate problems encountered by solid state detectors. Furthermore, the detector will be tunable in a wide energy regio ...

    SBIR Phase I 2001 Department of Commerce
  8. Composite, Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    In this Phase I SBIR Program, K+P Agile will develop a high strength, lightweight, modular, composite windshield structure for the MK V Special Operations Craft (SOC) that will not fail when the craft passes through a wave (or

    SBIR Phase I 2001 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government